alarm engine kill

[mulaz]

i am about to fit a alarm.
sorted out the central locking and the flasher wiring.

But can someone recomend what would be the best part on the ignition circuit to cut to kill the engine on a blue top engine.

[un1eash]

There is a purple/black wire behind the passenger seat in the loom that if used disables the starter motor. Its the wire toyota used when they fitted scorpion alarms on most mk1's.

[mulaz]

Many Thanks

[mulaz]

Had a quick look behind the pasenger seat at the loom and the only wire that i can see that is purple has a white stipe.

will take a look at the wiring diagram and see what that wire controls

[un1eash]

Sorry, my bad, the black and purple wire was from the alarm side. The wire you need to split looks like this, its black with a brown pin stripe and red/brown dots.....

[jimi]

I can't find Black/Brown on the "starter relay" circuit, according to the diagrams it would be a Black/White to disable the start relay, not ideal IMHO as you could still bump start the car.
I might be wrong, but I think that's Black/Orange, breaking into that would disable the "engine main relay", which is ideal for an alarm/immobiliser as it cuts the power to ECU and ignition circuits

[mulaz]

Yea Thats the wire to cut to disable the car

The engine turns over but does not start, also doubles as a input for the ACC on the alarm module.

many thanks again

[un1eash]

Glad you got it sorted.