[Mk2] [Turbo] Bride rails, recaro seats

[Race Idiot]

Are the standard MR2 recaro seat rails the same as conventional MK2 rails?

No the MR2 recaro rails unbolt by 6 bolts where the conventional mk2 rails are part of the seat.
Image Replaced With URL For Quote http://i536.photobucket.com/albums/ff32 ... bframe.jpg
I have fitted recaros from an evo on the these runners
Image Replaced With URL For Quote http://i536.photobucket.com/albums/ff32 ... dmbase.jpg
JDM Recaros are 6 bolt fitting where recaros out of a Ford are 4 bolt.
I do have this set of rev4 option recaros for sale without subframes well you can have evo subframes if you want
Image Replaced With URL For Quote http://i536.photobucket.com/albums/ff32 ... recaro.jpg
HTH

How much for the rev4 ones?

[samg1988]

I might sell my red integra recaros with modified mr2 frames if anyones interested. Looking at around 400, or cheaper with a P/X for standard seats.

[madbasshunter]

just to add MR2 recaro rails aren't the same fitment as recaro speed rails as far as I could find out anyway (went through that on here a while ago).

Thought I would resurrect this thread as my latest Speed (which I have fitted on rev3 mr2 recaro runners to match the other) came with a Bride T049 subframe attached to it.

MR2 recaro rails on left Bride on right

HTH

[Race Idiot]

So the T049 Rail fits the recaro speed seat?

If it does thats awesome because I bought a Bride T049 rail from someone here!

Is your bride rail the left hand side or right hand side?

[madbasshunter]

So the T049 Rail fits the recaro speed seat?
Yes it does as I took it off my speed.

Is your bride rail the left hand side or right hand side?
Mine is a drivers side, but by removing the seat belt clip off the subframe and mounting the seat belt clip on the bolt toyota nicely put on the centre tunnel by the seat (which had a flat bar fitted on it ) it could be used on either side as I believe somebody else did this.