Rev2 GT-S. Monster engine build, used exterior. Gauging price/interest

MR2s for sale - all versions & variants

Moderators: IMOC Moderators, IMOC Committee Members

Wingers
Posts: 809
Joined: Sun Apr 15, 2007 9:30 am
Location: Northampton
Contact:

Re: Rev2 GT-S. Monster engine build, used exterior. Gauging price/interest

Post by Wingers »

Don't sell up now!

What's wrong with the boost controller?
If your Pectel ECU has a PWM output that's unused then I can get you a solonoid for about £20 and you're back on track.


Wingers
cantfindausername
Posts: 9202
Joined: Tue Dec 14, 2004 12:15 pm
Location: Crawley, West Sussex
Contact:

Re: Rev2 GT-S. Monster engine build, used exterior. Gauging price/interest

Post by cantfindausername »

The air injector is set up incorrectly. We took a gamble to keep it within a fail safe area, but the gamble didn't pay off. Infact it went the other way. I've got some solenoids eye'd up, the same ones AEM etc use. Can you send me some details of the ones you're able to get please?

Thanks,
Ant
Image
***RIP Car13 ***
*** Now in an Evo ***
Andy F
Posts: 2384
Joined: Tue Dec 14, 2004 8:08 pm
Location: Leeds utd

Re: Rev2 GT-S. Monster engine build, used exterior. Gauging price/interest

Post by Andy F »

Ant what type do you need??

I have a couple (motec) that i dont need, i can send you 1 if it will help!

FOC of course :)

BTW we just use the stock rev3 valve now and plumb it a bit different!

Andy
Image
Built by YVS Performance
Every car that leaves runs 2 bar+
cantfindausername
Posts: 9202
Joined: Tue Dec 14, 2004 12:15 pm
Location: Crawley, West Sussex
Contact:

Re: Rev2 GT-S. Monster engine build, used exterior. Gauging price/interest

Post by cantfindausername »

The one I'm after is a MAC valve. Its basically a 3 port Poppet valve solenoid.

What ones do you have?
Image
***RIP Car13 ***
*** Now in an Evo ***
Andy F
Posts: 2384
Joined: Tue Dec 14, 2004 8:08 pm
Location: Leeds utd

Re: Rev2 GT-S. Monster engine build, used exterior. Gauging price/interest

Post by Andy F »

I have these two, the red valve has 2 ports and the black has 3
Any good matey??
Image
Image
Built by YVS Performance
Every car that leaves runs 2 bar+
cantfindausername
Posts: 9202
Joined: Tue Dec 14, 2004 12:15 pm
Location: Crawley, West Sussex
Contact:

Re: Rev2 GT-S. Monster engine build, used exterior. Gauging price/interest

Post by cantfindausername »

Not sure if they're what we need. For the sake of £20 I'll give them a miss and stick with the MAC valve as I know it will do what we want, and I've already got the fittings lined up for it. Really appreciate the offer though mate :thumleft:

Thanks,
Ant
Image
***RIP Car13 ***
*** Now in an Evo ***
Andy F
Posts: 2384
Joined: Tue Dec 14, 2004 8:08 pm
Location: Leeds utd

Re: Rev2 GT-S. Monster engine build, used exterior. Gauging price/interest

Post by Andy F »

no worries Ant
Stick at it dude :thumleft:
Image
Built by YVS Performance
Every car that leaves runs 2 bar+
Razor04
Posts: 2560
Joined: Mon Jun 09, 2008 4:25 pm

Re: Rev2 GT-S. Monster engine build, used exterior. Gauging price/interest

Post by Razor04 »

This is one hell of a car, seen it in action on a 3 car run and can vouch for it's performance, custom built engine and brakes by the owner :clap: and devastating acceleration :thumleft: Sorry to see it up for sale. This car spits proper flames 8)
cantfindausername
Posts: 9202
Joined: Tue Dec 14, 2004 12:15 pm
Location: Crawley, West Sussex
Contact:

Re: Rev2 GT-S. Monster engine build, used exterior. Gauging price/interest

Post by cantfindausername »

Razor04 wrote:This is one hell of a car, seen it in action on a 3 car run and can vouch for it's performance, custom built engine and brakes by the owner :clap: and devastating acceleration :thumleft: Sorry to see it up for sale. This car spits proper flames 8)


Thanks for the nice comments. Brought a smile to my face. I'm hoping to be able to keep the car unless an unrefusable offer came along. Doesn't look like that will happen for the time being, so just gonna have to take my time to get the things done that I need to. :) With a bit of luck I'll be able to get it to a couple more meets next year. :pray:
Image
***RIP Car13 ***
*** Now in an Evo ***
Leon.
Posts: 12780
Joined: Fri Jan 07, 2005 7:35 pm
Location: Guildford, Surrey

Re: Rev2 GT-S. Monster engine build, used exterior. Gauging price/interest

Post by Leon. »

NO-ONE MAKE AN OFFER, THIS CAR IS NOT FOR SALE :oldtongue: :lol: :mrgreen:
cantfindausername
Posts: 9202
Joined: Tue Dec 14, 2004 12:15 pm
Location: Crawley, West Sussex
Contact:

Re: Rev2 GT-S. Monster engine build, used exterior. Gauging price/interest

Post by cantfindausername »

Leon. wrote:NO-ONE MAKE AN OFFER, THIS CAR IS NOT FOR SALE :oldtongue: :lol: :mrgreen:


:lol: :thumleft:
Image
***RIP Car13 ***
*** Now in an Evo ***
cantfindausername
Posts: 9202
Joined: Tue Dec 14, 2004 12:15 pm
Location: Crawley, West Sussex
Contact:

Re: Rev2 GT-S. Monster engine build, used exterior. Gauging price/interest

Post by cantfindausername »

... Maybe another day ...
Image
***RIP Car13 ***
*** Now in an Evo ***
b8ucks
Posts: 630
Joined: Sat Aug 27, 2005 1:33 pm
Location: Essex

Re: Rev2 GT-S. Monster engine build, used exterior. Gauging price/interest

Post by b8ucks »

... Maybe another day ...


lol
cantfindausername
Posts: 9202
Joined: Tue Dec 14, 2004 12:15 pm
Location: Crawley, West Sussex
Contact:

Re: Rev2 GT-S. Monster engine build, used exterior. Gauging price/interest

Post by cantfindausername »

Lol bloody thing makes me change my mind more often than the weather!
Image
***RIP Car13 ***
*** Now in an Evo ***
b8ucks
Posts: 630
Joined: Sat Aug 27, 2005 1:33 pm
Location: Essex

Re: Rev2 GT-S. Monster engine build, used exterior. Gauging price/interest

Post by b8ucks »

Lol bloody thing makes me change my mind more often than the weather!


I know what you're getting at. I put all the effort in to build a 500bhp mr2 and ended up selling up before I finished it. TBH now that century's car is no longer around, yours has to be a contender for the most mechanically advanced and well thought out cars on the forum.

So surely you can dig down that bit extra to see what it's like at 2bar? No doubt if you felt it running with that power you'd never want to sell it.

Either way best of luck with it mate. Free bump for what really is an extraordinary mr2.
cantfindausername
Posts: 9202
Joined: Tue Dec 14, 2004 12:15 pm
Location: Crawley, West Sussex
Contact:

Re: Rev2 GT-S. Monster engine build, used exterior. Gauging price/interest

Post by cantfindausername »

Thanks for the kind words mate. I've start a few enquiries so will see how it pans out.
Image
***RIP Car13 ***
*** Now in an Evo ***
Post Reply

Return to “MR2s for Sale”