Charge cooler

[Mark Edwards]

Should be a lot easier to fit to a rev3 yes. The TB sock will fit straight on for starters rather than butchering it like i had to. Brackets aren't a really big issue, i've got the st205 bracket that i modified to suit the job but you could easily make something that will work. Most of it is held in place by the in and out hoses anyway with the bracket being more of a stabilizer than anything.

[Grajey]

Thanks for that.

I have the ST205 "sock" and I thought it may fit straight on to REV3 TB.

So, theoretically I only need to check brackets needed and I should be ready to go.

Apart from removing nosecone and fitting pre-rad and running water pipes and checking no leaks and re-fitting nosecone.

I need less work and more fun time.

[Mark Edwards]

Thanks for that.

I have the ST205 "sock" and I thought it may fit straight on to REV3 TB.

So, theoretically I only need to check brackets needed and I should be ready to go.

Apart from removing nosecone and fitting pre-rad and running water pipes and checking no leaks and re-fitting nosecone.

I need less work and more fun time.

I'd fit the pre rad and pipes first and then you can still drive it around until you're ready to fit the cc.

[Grajey]

Yeah, I had considered doing that - splitting the fitting into 2 parts.

The only reason I decided not to do so was the checking for water leaks at the front.

I'm considering trying to find a rad, similar to the GT4 rad, that will fit across the front opening and between the fog lights.

Anyone any idea what volume the Cinq rad is?