Door won't open HELP

Discussion and technical advice the SW20 MR2. 3S-GTE, 3S-GE, 3S-FE etc
Anything and everything to do with maintenance, modifications and electrical is in here for the Mk2.

Moderators: IMOC Moderators, IMOC Committee Members

Post Reply
kaipie
Posts: 40
Joined: Sun May 22, 2005 12:43 pm
Location: Ipswich
Contact:

Door won't open HELP

Post by kaipie »

Hello pls help my drivers door wont open it worked fine when i left this morning and when i got to where i was going it wouldn't open any ideas as obviously you need the door card off to get to the mechanism but then u need the door open to remove the door card catch 22 please someone help as its not much fun climbing across and getting out of the passenger door #-o
jim55
Posts: 255
Joined: Mon Jun 09, 2008 7:30 pm
Location: south side glasgow

Re: Door won't open HELP

Post by jim55 »

elaborate a bit -is it locking from the key/opening from the outside handle ?whats it doing ?completely gubbed
mr2 import
Posts: 195
Joined: Wed Sep 21, 2005 7:56 pm
Location: DUMFRIES

Re: Door won't open HELP

Post by mr2 import »

you have a PM mate :thumleft: should get you open :thumleft:
just started my own welding business! fingers crossed it works out :pray:
mr2 import
Posts: 195
Joined: Wed Sep 21, 2005 7:56 pm
Location: DUMFRIES

Re: Door won't open HELP

Post by mr2 import »

any luck with getting your door open yet??
just started my own welding business! fingers crossed it works out :pray:
kaipie
Posts: 40
Joined: Sun May 22, 2005 12:43 pm
Location: Ipswich
Contact:

No good

Post by kaipie »

Stiil no joy opening it pls pls pls help
mr2 import
Posts: 195
Joined: Wed Sep 21, 2005 7:56 pm
Location: DUMFRIES

Re: Door won't open HELP

Post by mr2 import »

have you had a shot at getting the door card off??

is the car locked

can you see what is happening when you have the window down and look through the rubber and pull the inner and outer handles??

are all the links moving???
just started my own welding business! fingers crossed it works out :pray:
kaipie
Posts: 40
Joined: Sun May 22, 2005 12:43 pm
Location: Ipswich
Contact:

Looks Ok

Post by kaipie »

The mechanism seems to be working fine thats why im so stuck.. Also i have pulled the door card out of the way
Post Reply

Return to “MR2 MK2 1990 - 1999 NA & Turbo”