Rev 3 EPC Settings

Discussion and technical advice the SW20 MR2. 3S-GTE, 3S-GE, 3S-FE etc
Anything and everything to do with maintenance, modifications and electrical is in here for the Mk2.

Moderators: IMOC Moderators, IMOC Committee Members

Post Reply
jannerboy
Posts: 71
Joined: Fri Sep 22, 2006 1:53 pm

Rev 3 EPC Settings

Post by jannerboy »

Hi, i've got the 2 disk version of the EPC installed ok. I am trying to get to info for a Rev 3 1994 on MR2 turbo...but for the life of me i cannot seem to enter the right info!!! :oops:

We've just put a rev 3 motor replacing the rev 2 so i wanted to get at all the engine details etc...i don't have a VIN for a later car...

Can anyone help? What details have others entered to get to the last of the MR2 turbos...?

John
Top
raptor95GTS
Posts: 6213
Joined: Tue Dec 14, 2004 7:14 pm
Location: glasgow
Contact:
Contact raptor95GTS

Re: Rev 3 EPC Settings

Post by raptor95GTS »

enter the numbers as you have for the rev2 - then change production year to 95 - check and you'll see the part numbers have changed. It worked for me on a rev3 to get the part numbers for the rev5 rear spoiler :thumleft:
Top
jannerboy
Posts: 71
Joined: Fri Sep 22, 2006 1:53 pm

Re: Rev 3 EPC Settings

Post by jannerboy »

allan, my rev 2 vin and changing the year didn't work. i have tried inputing different Catalog Codes and that didn't work...

it can't be that difficult... #-o

why is the later mr2 turbo not in the list of catalog codes??? it only lists MR2 8912-9506 (and others) covering the whole range of MR2s...

HELP !!! :?
Top
raptor95GTS
Posts: 6213
Joined: Tue Dec 14, 2004 7:14 pm
Location: glasgow
Contact:
Contact raptor95GTS

Re: Rev 3 EPC Settings

Post by raptor95GTS »

i don't have the 2 CD EPC but I do have one that works nicely so I'm afraid I can't help you. There is an online guide for rev3+ http://www.ayrpark.plus.com/epc/mr2epc.html if that helps
Top
jannerboy
Posts: 71
Joined: Fri Sep 22, 2006 1:53 pm

Re: Rev 3 EPC Settings

Post by jannerboy »

allan,

right i have a newer multi-disk version installed...
i have the CDs for the Euro and the Jap versions lined up and it seems to all work ok...havn't installed the Gen versions yet...

but i can't get to 1994 on mr2 turbo info...

perhaps u could do me a favour? could you tell me the full part number for the rev3+ inlet manifold and throttle body parts?

thanks again...
Top
raptor95GTS
Posts: 6213
Joined: Tue Dec 14, 2004 7:14 pm
Location: glasgow
Contact:
Contact raptor95GTS

Re: Rev 3 EPC Settings

Post by raptor95GTS »

this should help

http://www.ayrpark.plus.com/epc/toyota/ ... 01_19.html
Top
jannerboy
Posts: 71
Joined: Fri Sep 22, 2006 1:53 pm

Re: Rev 3 EPC Settings

Post by jannerboy »

hi allan,

the picture is the same for both the epcs at this site.
the manifold part numbers are the same...and its the T-VIS design Rev 2.

john
Top
raptor95GTS
Posts: 6213
Joined: Tue Dec 14, 2004 7:14 pm
Location: glasgow
Contact:
Contact raptor95GTS

Re: Rev 3 EPC Settings

Post by raptor95GTS »

17101-88484 MANIFOLD, INTAKE 01.11.1993-01.08.1999 3SGTE..SW20

that's from my epc and that diagram. Both look 8 runner inlet, maybe they got lazy on the pics just updated the part numbers?
Top
Post Reply

Return to “MR2 MK2 1990 - 1999 NA & Turbo”