Search found 6 matches

by shaboy
Wed Nov 05, 2008 2:30 pm
Forum: MR2 MK2 1990 - 1999 NA & Turbo
Topic: any reason why a downpipe would go from 2.5inchs, to 4inchs, to 3-3.5inch???
Replies: 26
Views: 1145

Re: any reason why a downpipe would go from 2.5inchs, to 4inchs, to 3-3.5inch???

not a hundred percent sure bu ti might have read that they treat the screamer as a blowing exhaust :-k

could be totally wrong on this though ](*,)
by shaboy
Tue Nov 04, 2008 1:53 pm
Forum: Modifications
Topic: [Mk2] [Turbo] Screamer pipes
Replies: 19
Views: 1696

Re: [Mk2] [Turbo] Screamer pipes

from what i've read, if the turbo has an internal wastegate then the screamer pipe is useless/you don't get the same sound as with an external wastegate. the problem is that both the exhaust exit and the internal wastegate both flow into the same chamber so the wastegate gasses are not completely cu...
by shaboy
Fri Oct 24, 2008 10:54 am
Forum: Mechanical
Topic: [Mk2] [Generic] leaking brake distributor block thing...
Replies: 5
Views: 355

Re: [Mk2] [Generic] leaking brake distributor block thing...

hopefully picture is shwon below, the part i'm on about is circled in red http://i299.photobucket.com/albums/mm309/shaboy_sx/brake.jpg not the best photo i'm afraid but its leaking from the plug that srcews into the very bottom (the rusty coloured bit on the bottom of the nice silver bit) when i say...
by shaboy
Thu Oct 23, 2008 3:27 pm
Forum: Mechanical
Topic: [Mk2] [Generic] leaking brake distributor block thing...
Replies: 5
Views: 355

Re: [Mk2] [Generic] leaking brake distributor block thing...

ha, not that i know off, might have done some work for the whacky racers though :mrgreen:

i'll get looking in the trader section and the manual so that i can at least find out what the proper name of the part is, can always get one from toyota then
by shaboy
Thu Oct 23, 2008 10:02 am
Forum: Mechanical
Topic: [Mk2] [Generic] leaking brake distributor block thing...
Replies: 5
Views: 355

[Mk2] [Generic] leaking brake distributor block thing...

my brake distribution block (the part that is bolted to the master cylinder in the frunk and has loads of pipes going in and out) is leaking out of the plug that screws in to the bottom. this needs sorting to get it through the MOT so I can get the little girl on the road. is it possible for me to w...
by shaboy
Tue Oct 14, 2008 1:36 pm
Forum: Member Profiles
Topic: Newbie in Bristol
Replies: 2
Views: 609

Newbie in Bristol

Hello, just joined up on mr2oc so thought i best introduce myself on here as well. i'm new to the MR2 game, had a 200sx S13 for a couple of years (of which its spent some of its time actually on the road) and like jap cars. always liked the mk2 MR2 so have just bought a 1990 t-bar turbo which i hope...

Go to advanced search