Speaker fitment / Wiring diagrams. please contribute!

[Neil_turbo]

Ok,

So most of the posts in this section are regards to fitment of component speakers, which ones require spacers, and which dont. I think its about time that we made a collective list of what we have installed, and how many mm's of spacing were needed, eg 2 x 18mm mdf = 36 etc.

I will then keep this list updated and get a photo how-to added. hopefully it can be made a sticky and will be of great help to those changing/uprating their speakers.

But for this to work everbody needs to reply here with what they have and what spacers were needed!

Cheers

Neil

[Neil_turbo]

MK2.............

Front..........
5"...
Focal Poly Kevlar 130K - straight swap. Tweeters needed casing cutting down to fit inside tweeter location.

5.25"...
Helix HXS235 - 12mm spacer

5.5"...
.

6"...
Oz Audio Matrix Elite 6" Components - approx 1" spacer, tweeters unsure


6.5"...
6.5" DLS R6A -15mm spacers, Tweeters straight swap.
Focal Access 165 - 18mm Spacers, Tweeters straight swap.
Focal k2's 165mm - 11mm Spacers, Tweeters straight swap.
Infinity Kappa components 165mm - straight swap, Tweeters straight swap
Infinity Reference - 24mm spacers, Tweeters straight swap
Helix RS6.3 - 36mm spacers, Tweeters no chance!
Image Dynamics CX62 - 36mm spacers (mid-bass units)

Rear..........
infinity reference 3.5" - straight swap
infinity reference 5.25" - hacksaw!
kicker K35 3.5" coaxials
mac audio 3.5" coaxials, fit in two of the four holes

MK2 Sub Boxes..........
Alpine SWR-1022D/1042D (old type r, white face) - Yes
Diamond Audio D6
Diamond Audio M3101.8 10"
DLS W310B - Will fit, but only reccommmended for ported enclosures of 1.2CuFeet
Infinity Ref 1040W 10" - Yes
JBL GT4-10
JL 10W1V2 - Yes (some JL baskets maybe smaller than 10", please specify if you want a smaller hole when ordering!)
MTX Thunder 5500 10" Yes
Phase Linear Aliante 10SI - Yes
pheonix gold octane ZR10D2 - Yes
phoenix gold xenon 10" 10d2 - Yes (remove rubber magnet cover)
Rockford Punch Stage 3 P310D2/D4 - Yes
Sony Xplod XS-L101P5S - Yes
Vibe PT-100 - Yes

Require 18mm deeper boxes
Alpine SWR-1022D/1044D (new type r, black face)
Sony X-Plod XS-L121P5S 12"

Require 36mm deeper boxes
Audiobahn AW1206T 12"

MK2 Wiring Colours..........
A1 Light Green - Front right (+)
A2 Pink - Front left (+)
A3 Grey - Ignition Switch
A4 Blue Green - Battery
A5 Blue - Front right (-)
A6 Purple - Front left (-)
A7 Brown - Earth (Ground)
A8 Pink Blue - Antenna (power control)
A9 Black Red - Amplifier (power control)
A10 Green - Dimmer

B1 Red - Rear right (+)
B2 Black - Rear left speaker (+)
B3 White - Rear right (-)
B6 Yellow - Rear left speaker (-)

Wiring Diagram For Premium System with 1 Sub (UK & European+Aussie)




MK1.............

Front..........

Rear..........

MK1 Sub Boxes..........
Diamond Audio M3101.8 10"
Phase Linear Alliante 10si

MK1 Wiring Colours..........

Front left +ve : Pink, Red dash
Front left –ve : Purple
Front right +ve : Light Green, Red dash
Front right –ve : Blue
Rear left +ve : Black, Red dash
Rear left –ve : Yellow, Red dash
Rear right +ve : Red, Blue dash
Rear right –ve :White, Red dash
Constant supply : Blue, Yellow stripe, Red dash
Switched supply : Grey, Red dash
Earth : Brown
Lights : Dark green
Ariel : (2 wires on car both connected to same radio wire)
a) Black, Red stripe, Red dash
b) Pink, Blue stripe, Red dash

[sadgav]

I have just put some infinity reference 5.5" and the speaker fits straight in with the tweeter using the same mount as the existing and just bolting straight on.
Great sound - easy fit, deep tone.

Gavin

[jrleech]

5" Focal Poly Kevlar 130K.... straight swap. Tweeters needed casing cutting down to fit inside tweeter location.

I think all 5" speakers fit straight in without spacers??

Cheers,
Jon

[nailmonkey]

Hi Neil.

I've got Focal Access 165 (6.5") which needed 18mm spacers. The tweeters fit straight into the stock location though.

Nik

[Neil_turbo]

Cheers Nik, Jon, Gav (Welcome to IMOC )

List updated!

We are going to need more speakers if this list is going to become usefull!

Cheers

Neil

[sadgav]

sorry, made a boob - mine are 6.5" in the front - but still went straight in with no mods whatsoever.

(nice to be welcomed!)

Gavin.

[mushky]

mk2. 6.5" DLS R6A comps in the front with a 15mm spacer. Tweeters went straight in.

sub in Neil's box is Infinity 10" 1040W

[Bonmaklad]

i got kicker 6.5INCH ni the front sound perfect!!!! and a nice jbl 10inch in the back of passesnger seat

[Sidewinder]

Great idea Neil. Perhaps one of the Admin team could make this a sticky for this section?

[SwitchBlade]

MKII

Helix HXS235 - I believe 12mm baffle
Helix RS6.3 - mid needs a 36mm baffle, or with light surgery to the door you can get away with 18mm, no hope of tweet fitting in stock location mind.
Image Dynamics CX62 - magnet just fits through door hole, again 36mm baffle to fit without surgery.

[Neil_turbo]

i got kicker 6.5INCH ni the front sound perfect!!!! and a nice jbl 10inch in the back of passesnger seat

Any spacers required mate - tweeters fit ok?

Cheers

Neil

[Neil_turbo]

MKII

Helix HXS235 - I believe 12mm baffle
Helix RS6.3 - mid needs a 36mm baffle, or with light surgery to the door you can get away with 18mm, no hope of tweet fitting in stock location mind.
Image Dynamics CX62 - magnet just fits through door hole, again 36mm baffle to fit without surgery.

You know what sizes these are off-hand, if not will find out on google

Cheers

Neil

[Neil_turbo]

Great idea Neil. Perhaps one of the Admin team could make this a sticky for this section?

Cheers Nige!

It should save a lot of questions in this part of the forum, will speak to a mod when its a bit more developed!

[SwitchBlade]

Sorry mate the 235s are 5.25" the others are 6.5".

[Neil_turbo]

Cheers mate, you know about the tweeters on the last set?

Nice Install btw!

Neil

[SwitchBlade]

The Image Dynamics are just mid-bass units. There are ID tweeters and horns to go with them but I've not owned either.

[Neil_turbo]

cheers mate! Updated again!

[Quigonjay]

great idea neil, can we have this as a sticky mods?

[Neil_turbo]

cheers mate!

were going to need more contributions if this is going to be any use as a sticky!

Come on people!