Hoping for some info...my 95 rev3 tubby single exit exhaust has rusted through ...my question is will a twin exit think its japspeed off a rev2 fit mine ok
Also to add I have a berk dp
Any help much appreciated
exhaust
Moderators: IMOC Moderators, IMOC Committee Members
-
- Posts: 141
- Joined: Tue May 27, 2008 5:43 pm
- Location: NORTHAYRSHIRE, SCOTLAND
Re: exhaust
how bad has the back box rotted ???
i have a hks single exit system on mine with dp fitted by gi motorsport in killie
i had to get them to fabricate a B pipe so mines would fit
wullie is your the white turbo that goes about saltcoats ??
i have a hks single exit system on mine with dp fitted by gi motorsport in killie
i had to get them to fabricate a B pipe so mines would fit
wullie is your the white turbo that goes about saltcoats ??
-
- Posts: 141
- Joined: Tue May 27, 2008 5:43 pm
- Location: NORTHAYRSHIRE, SCOTLAND
Re: exhaust
how do mate ...nope mine is the low red one with black alloys and a chrome rim
the back box has a big whole in the back at the weld its a single exit kakimoto ....
i see a twin on ebay guy says it off a rev 2 says it will fit mine but i wanted to check
the back box has a big whole in the back at the weld its a single exit kakimoto ....
i see a twin on ebay guy says it off a rev 2 says it will fit mine but i wanted to check
Repair
If it's rusted through the weld, you could always get an exhaust shop or welder near you to look at it, as you might be able to fix it and save replacing it, provided it's not going to be visible unless you're lying on the ground