Cant get my NAT type to status:open. Its currently on moderate.
I've followed the steps on youtube and google etc but no luck.
192.168.1.1 wont load but 192.168.0.1 will but then can get past the username and password box! Any ideas guys? I've tried 'admin' as both but they wont have it.
I've tried these links:
http://www.youtube.com/watch?v=2rcaUh0bmWM
http://www.youtube.com/watch?v=IVIBuwDs ... re=related
Any help would be great.
Help needed getting my NAT type to open on my 360!
Moderators: IMOC Moderators, IMOC Committee Members
-
- Posts: 7062
- Joined: Mon Mar 21, 2005 6:53 pm
- Location: Hastings, East Sussex
Help needed getting my NAT type to open on my 360!
Pain is temporary, pride is forever.
Re: Help needed getting my NAT type to open on my 360!
what modem do u have? if u are with sky the password wont be admin it will be a code on the back of the modem if u are virgin its usually changeme other then that type the router make into google and you should get threads telling u the user/password etc
-
- Posts: 7062
- Joined: Mon Mar 21, 2005 6:53 pm
- Location: Hastings, East Sussex
Re: Help needed getting my NAT type to open on my 360!
H3RB wrote:what modem do u have? if u are with sky the password wont be admin it will be a code on the back of the modem if u are virgin its usually changeme other then that type the router make into google and you should get threads telling u the user/password etc
Sorted it mate, just done it, well got into the sky router settings anyway!
Now just gotta in put all the codes from XBL to the sky router!
Pain is temporary, pride is forever.
Re: Help needed getting my NAT type to open on my 360!
thai boxer wrote:H3RB wrote:what modem do u have? if u are with sky the password wont be admin it will be a code on the back of the modem if u are virgin its usually changeme other then that type the router make into google and you should get threads telling u the user/password etc
Sorted it mate, just done it, well got into the sky router settings anyway!
Now just gotta in put all the codes from XBL to the sky router!
quicker/easier way, set the static ip on the 360 then in the router set the xbox's ip addy as the default DMZ server
-
- Posts: 7068
- Joined: Mon Feb 11, 2008 5:47 pm
Re: Help needed getting my NAT type to open on my 360!
i get this a lot..
reset your router.. then power down for 2 mins.. restart
then go on the xbox and do a check network status...
some times i have had to do this 2wice but has always cleared it..
reset your router.. then power down for 2 mins.. restart
then go on the xbox and do a check network status...
some times i have had to do this 2wice but has always cleared it..
MR2 Sprint zombie outbreak response vehicle
https://www.facebook.com/pages/Zombie-S ... 0272127049
https://www.youtube.com/channel/UCNBrEd ... s-qbox0FwQ
https://www.facebook.com/pages/Zombie-S ... 0272127049
https://www.youtube.com/channel/UCNBrEd ... s-qbox0FwQ
Re: Help needed getting my NAT type to open on my 360!
I get "strict" then just power down the hub, and restart, and hey presto "open"
-
- Posts: 7062
- Joined: Mon Mar 21, 2005 6:53 pm
- Location: Hastings, East Sussex
Re: Help needed getting my NAT type to open on my 360!
pistol pete wrote:i get this a lot..
reset your router.. then power down for 2 mins.. restart
then go on the xbox and do a check network status...
some times i have had to do this 2wice but has always cleared it..
Tried this a few times, no luck.
Pain is temporary, pride is forever.
-
- Posts: 7062
- Joined: Mon Mar 21, 2005 6:53 pm
- Location: Hastings, East Sussex
Re: Help needed getting my NAT type to open on my 360!
H3RB wrote:thai boxer wrote:H3RB wrote:what modem do u have? if u are with sky the password wont be admin it will be a code on the back of the modem if u are virgin its usually changeme other then that type the router make into google and you should get threads telling u the user/password etc
Sorted it mate, just done it, well got into the sky router settings anyway!
Now just gotta in put all the codes from XBL to the sky router!
quicker/easier way, set the static ip on the 360 then in the router set the xbox's ip addy as the default DMZ server
Ok....what!?
Pain is temporary, pride is forever.