Hi everyone,
Its taken me 2 and a half years but my 4AGTE project is now finished!
no power figures yet until the end of the month when full race map is done on the rollers.
already makes boost at 2500rpm half throttle.
not sure how to post pictures so check out the garage photos. hope you all enjoy the anti-lag launch control lol.
will try to get some more engine bay photos on soon.
Rob
4AGTE Project now on the road
Moderators: IMOC Moderators, IMOC Committee Members
-
- Posts: 75
- Joined: Tue May 30, 2006 5:41 pm
- Location: Southampton
4AGTE Project now on the road
4AGTE is on the way...
http://www.imoc.co.uk/forums/garage.php ... e&CID=2060
http://www.imoc.co.uk/forums/garage.php ... e&CID=2060
Re: 4AGTE Project now on the road
EXCELLENT
What ECU are you using?
And be careful with anti-lag, it is an engine killer (if you're not sensible).
What ECU are you using?
And be careful with anti-lag, it is an engine killer (if you're not sensible).
-
- Posts: 75
- Joined: Tue May 30, 2006 5:41 pm
- Location: Southampton
Re: 4AGTE Project now on the road
Cheers aw11 rally.
By the way your car is very cool. And im already thinking of stealing your gearbox idea oneday if you dont mind. im scared of snapping driveshafts etc.
my car is running an AEM ecu.
it is ment for a MK2 but i made up my own wiring loom from scratch using MK2 ecu plugs.
thanks for the engine damage concern but no worries i dont want to destroy it yet lol.
As for the mapping of the ECU this was done by Adam at Pro Performance International. He knows an awful lot about AEM equipment and is always helpful.
By the way your car is very cool. And im already thinking of stealing your gearbox idea oneday if you dont mind. im scared of snapping driveshafts etc.
my car is running an AEM ecu.
it is ment for a MK2 but i made up my own wiring loom from scratch using MK2 ecu plugs.
thanks for the engine damage concern but no worries i dont want to destroy it yet lol.
As for the mapping of the ECU this was done by Adam at Pro Performance International. He knows an awful lot about AEM equipment and is always helpful.
4AGTE is on the way...
http://www.imoc.co.uk/forums/garage.php ... e&CID=2060
http://www.imoc.co.uk/forums/garage.php ... e&CID=2060
-
- Posts: 7068
- Joined: Mon Feb 11, 2008 5:47 pm
Re: 4AGTE Project now on the road
thats one very cool car sir..
credit to you
credit to you
MR2 Sprint zombie outbreak response vehicle
https://www.facebook.com/pages/Zombie-S ... 0272127049
https://www.youtube.com/channel/UCNBrEd ... s-qbox0FwQ
https://www.facebook.com/pages/Zombie-S ... 0272127049
https://www.youtube.com/channel/UCNBrEd ... s-qbox0FwQ
-
- Posts: 7608
- Joined: Sun Nov 13, 2005 6:28 pm
- Location: Newbury
Re: 4AGTE Project now on the road
Very nice.
Which turbo manifold did you use in the end?
And you need to get it dyno'd!
Which turbo manifold did you use in the end?
And you need to get it dyno'd!
-
- Posts: 75
- Joined: Tue May 30, 2006 5:41 pm
- Location: Southampton
Re: 4AGTE Project now on the road
Thanks,
ive used a cast manifold ment for the corrola, had to make up a spacer between the manifold and the turbo to lift the turbo higher because it fouled with the cylinder head.
ive used a cast manifold ment for the corrola, had to make up a spacer between the manifold and the turbo to lift the turbo higher because it fouled with the cylinder head.
4AGTE is on the way...
http://www.imoc.co.uk/forums/garage.php ... e&CID=2060
http://www.imoc.co.uk/forums/garage.php ... e&CID=2060
-
- Posts: 6149
- Joined: Tue Jan 25, 2005 10:37 am
- Location: Market Drayton Shropshire
- Contact:
Re: 4AGTE Project now on the road
Well done Rob, that looks awesome, please keep posting about this project
-
- Posts: 563
- Joined: Wed Oct 03, 2007 6:22 pm
- Location: leicestershire
Re: 4AGTE Project now on the road
top notch, glad you have it running! always takes longer than you think these projects, my 4agte is still and load of parts in boxes!
4agte on the way