Products for flushing coolant System

Discussion and technical advice the SW20 MR2. 3S-GTE, 3S-GE, 3S-FE etc
Anything and everything to do with maintenance, modifications and electrical is in here for the Mk2.

Moderators: IMOC Moderators, IMOC Committee Members

Post Reply
TUBBY-DEUCE
Posts: 1846
Joined: Tue Feb 20, 2007 9:41 am
Location: Norwich

Products for flushing coolant System

Post by TUBBY-DEUCE »

I will be flushing the system this month, as it obviously hasnt been done for a while, just wonderd what the best product would be and what to avoid and any tips, cheers
User avatar
Lauren
IMOC Committee
Posts: 38632
Joined: Mon Dec 13, 2004 5:37 pm
Location: Greater Manchester
Contact:

Re: Products for flushing coolant System

Post by Lauren »

Flushing it with a hosepipe ought to do the job.
2020 GR Yaris - Circuit Pack :lover:
Charged
IMOC Committee
Posts: 8897
Joined: Fri Sep 02, 2005 8:09 pm
Location: Herts

Re: Products for flushing coolant System

Post by Charged »

I use a hose pipe.. I have used a product (name escapes me) from Halfrauds before but I dont think it did anything that a few flushes with water didn't.. Mk1s often take a lot of flushing to get the system cleaned out.
If you can't see the angle, you're in trouble.
TUBBY-DEUCE
Posts: 1846
Joined: Tue Feb 20, 2007 9:41 am
Location: Norwich

Re: Products for flushing coolant System

Post by TUBBY-DEUCE »

hose pipe eh :-k il have to google that one :mrgreen:

the reason i ask is because the coolant is orange with rust, i shall have a look in halfords tomorrow, i need something a bit more heavy duty than water
User avatar
Lauren
IMOC Committee
Posts: 38632
Joined: Mon Dec 13, 2004 5:37 pm
Location: Greater Manchester
Contact:

Re: Products for flushing coolant System

Post by Lauren »

TUBBY-DEUCE wrote:
i need something a bit more heavy duty than water


Like mains pressure water. :+:
2020 GR Yaris - Circuit Pack :lover:
Tiny
Posts: 3111
Joined: Fri Sep 21, 2007 7:00 pm
Location: Bordon

Re: Products for flushing coolant System

Post by Tiny »

Lauren wrote:
TUBBY-DEUCE wrote:
i need something a bit more heavy duty than water


Like mains pressure water. :+:


+1 seriously just reverse the flow a couple of times through the radiator pipes till the water runs clear :thumleft:
TUBBY-DEUCE
Posts: 1846
Joined: Tue Feb 20, 2007 9:41 am
Location: Norwich

Re: Products for flushing coolant System

Post by TUBBY-DEUCE »

will do lauren :thumleft: i just thought the internals will be pretty bunged up with rust and limescale possibly, i want it all to be running as efficently as possible :thumleft:
LiamTye
Posts: 463
Joined: Tue Mar 18, 2008 5:59 pm
Location: Sittingbourne

Re: Products for flushing coolant System

Post by LiamTye »

TUBBY-DEUCE wrote:will do lauren :thumleft: i just thought the internals will be pretty bunged up with rust and limescale possibly, i want it all to be running as efficently as possible :thumleft:


for the limescale use calgon 8) :wink:

mr2's live longer with calgon :lol:
TUBBY-DEUCE
Posts: 1846
Joined: Tue Feb 20, 2007 9:41 am
Location: Norwich

Re: Products for flushing coolant System

Post by TUBBY-DEUCE »

LiamTye wrote:
TUBBY-DEUCE wrote:will do lauren :thumleft: i just thought the internals will be pretty bunged up with rust and limescale possibly, i want it all to be running as efficently as possible :thumleft:


for the limescale use calgon 8) :wink:

mr2's live longer with calgon :lol:



:lol: that did cross my mind
LiamTye
Posts: 463
Joined: Tue Mar 18, 2008 5:59 pm
Location: Sittingbourne

Re: Products for flushing coolant System

Post by LiamTye »

give it a go let us know on the results :lol:
murf
Posts: 355
Joined: Wed Dec 22, 2004 2:56 pm
Location: Inverness, Scotland.

Re: Products for flushing coolant System

Post by murf »

Dishwasher tablet, pop one in a bucket of warm water, crumble up till it dissolves.
Drain your coolant, Pop the soapy water in, then run the engine up to temp.
Drain and flush through with the hose, then re-fill and bleed :D

I did my Mk1 the other night, it was amazing all the orange rusty crap that came out!
TUBBY-DEUCE
Posts: 1846
Joined: Tue Feb 20, 2007 9:41 am
Location: Norwich

Re: Products for flushing coolant System

Post by TUBBY-DEUCE »

murf wrote:Dishwasher tablet, pop one in a bucket of warm water, crumble up till it dissolves.
Drain your coolant, Pop the soapy water in, then run the engine up to temp.
Drain and flush through with the hose, then re-fill and bleed :D

I did my Mk1 the other night, it was amazing all the orange rusty crap that came out!


nice one, thats what im after innovative ideas :mrgreen: :thumleft:
Post Reply

Return to “MR2 MK2 1990 - 1999 NA & Turbo”