Rare exhaust?? What have you got?

[toxo]

2.5" through, 4" exits. 3" flexi?

http://www.fujitsubo.co.jp/english/E_prod_legalisR.html

Yeah that covers all the Legalis R's though, so is very variable There's a page in Japanese specifically about the MR2 one which tells you more precisely once you put it through google translate.

Edit: Here it is: http://www.fujitsubo.co.jp/product01.ph ... 0000002983

101.6mm exits (slash cut) - 4inch
Pipe varies from 70mm to 76.3mm - 2.73 to 3inch

[fizz]

ahh.. gotcha... for what its worth i also thought the tips on my car are about 4"

[fizz]

2.5" through, 4" exits. 3" flexi?

http://www.fujitsubo.co.jp/english/E_prod_legalisR.html

Yeah that covers all the Legalis R's though, so is very variable There's a page in Japanese specifically about the MR2 one which tells you more precisely once you put it through google translate.

Edit: Here it is: http://www.fujitsubo.co.jp/product01.ph ... 0000002983

101.6mm exits (slash cut) - 4inch
Pipe varies from 70mm to 76.3mm - 2.73 to 3inch

Going by that link at the bottom right...showing the DB levels for standard and Legalis R.. the last measure shows the legalis to be quieter

音量 標準
（STD） FUJITSUBO
音量アイドリング 70dB 70dB
近接排気騒音(4500rpm) 94dB 95dB
3000rpm 86dB 86dB
5000rpm 96dB 96dB
4000rpm～6000rpm 105dB 101dB

[cantfindausername]

cheers guys.

[cdti]

whats this one? its very loud

Image Replaced With URL For Quote http://url202.imageshack.us/url202/5200/photo0002b.jpg

anyone have a clue what it is?

maybe a custom one, never seen it before, similar to nur.

found out today, its a powerflow custom jobbie, any idea how much its worth, as i much prefer dual exit.

[MR2_CL]

found out today, its a powerflow custom jobbie, any idea how much its worth, as i much prefer dual exit.

unfortunately probably not alot, dependant on condition between £100-150 possible but not realy sure.

[MR2_CL]

bump this up again

could always get it pinned somewhere as so far there is quite a collection of amazing exhausts here... would be good to archive such things as its always neat to look and see what was around.

[willfinch36]

had a kakimoto one on my mr2 when I first bought it, I wanted something that looked standard and sounded sporty =mongoose + de-cat = awsome

[redmoose]

Love my legalisR, the exhaust note is a gorgeous deep rumble,
although it does have a nasty habit of setting the neighbours car alarm off when idling! they love it when i'm defrosting in the morning.

[mr-spider]

my MR Spider came with s/steel TRD single exit exhaust as an option
only loud when you floor it nice round town and high speed cruising

[Matty_GTS]

Departure 2 Pro all the way Can't beat it ;p

[cantfindausername]

Departure 2 Pro all the way Can't beat it ;p

Agreed!!

I just want to get my Y section made in stainless then I'll be happy with it. Already got the mid section done.

[Moo]

Not rare but slightly unique. A Mongoose modified with extended 4" slash cut tips.

[cantfindausername]

Nice! That could be a winner as I was never overly keen on the tips of the 'goose.

[Moo]

Nice! That could be a winner as I was never overly keen on the tips of the 'goose.

Cheers I never like the original tips either. I found one to be shorter than the other and it always sooted up the bottom of the stock rear bumper on one side. After fitting the Veilside bumper the stock Mongoose tips looked tiny and were well set back so they had to go. Funnily enough, the exhaust is a little less drony at 70mph with the bigger tips. Thought it would have been the other way around but it was an unexpected bonus

Here's a few more pics. Excuse the Lexus lights, went through a phase when I thought they looked the nuts but then had a reality check

[cantfindausername]

The drone is the biggest hold up for going back to the 'goose. Motorway speeds were horendous with that.

[sticks]

Not rare but a Mongoose modified with extended 4" slash cut tips.

Image Replaced With URL For Quote http://i78.photobucket.com/albums/j93/M ... ffuser.jpg

sorry for goin off topic but may i ask where you got that rear diffuser?ive been lookin at a few of them and yours is exactly what i want?

[Moo]

Not rare but a Mongoose modified with extended 4" slash cut tips.

Image Replaced With URL For Quote http://i78.photobucket.com/albums/j93/M ... ffuser.jpg

sorry for goin off topic but may i ask where you got that rear diffuser?ive been lookin at a few of them and yours is exactly what i want?

Custom made by Pacific Works. Speak to Luke, he's up for doing more

http://www.pacific-works.co.uk/car-profiles2.php

[cantfindausername]

wouldn't mind seeing what the brake ducts are like too.

[Moo]

wouldn't mind seeing what the brake ducts are like too.

Sorry to go OT but there you go They really work too. Went for a good blast at the weekend with some heavy braking, not a trace of fade.

http://www.imoc.co.uk/forums/viewtopic. ... highlight=