Guide: How to change from rev2 to rev3 ecu, see inside

Posts about anything do to with modifying your car such as fitting aftermarket parts, bodykit, or tuning the engine for more performance.

Moderators: IMOC Moderators, IMOC Committee Members

Post Reply
Gary ST165
Posts: 229
Joined: Wed Apr 26, 2006 4:54 pm
Location: South Wiltshire
Contact:
Contact Gary ST165

Re: Guide: How to change from rev2 to rev3 ecu, see inside

Post by Gary ST165 »

bump:

please repost the guide by the thread originator :(
Top
Gary ST165
Posts: 229
Joined: Wed Apr 26, 2006 4:54 pm
Location: South Wiltshire
Contact:
Contact Gary ST165

Re: Guide: How to change from rev2 to rev3 ecu, see inside

Post by Gary ST165 »

\:D/

Gary ST165 wrote:bump:

please repost the guide by the thread originator :(




:whistle: :whistle: :whistle:
Top
**BETSY**
Posts: 101
Joined: Sat Mar 26, 2005 7:03 pm
Location: Sussex

Re: Guide: How to change from rev2 to rev3 ecu, see inside

Post by **BETSY** »

Gary, Any specifics you need a hand with?
there are quite a few differences for us over the mr2 write up.

saying that, did you FULLY convert to a st185 loom?

ps system is different.
i use a 4 wire O2 sensor already, not sure if your 185 lump does?
Top
a16vwn1
Posts: 310
Joined: Mon Jun 27, 2005 11:35 pm
Location: oldbury,west mids
Contact:
Contact a16vwn1

Re: Guide: How to change from rev2 to rev3 ecu, see inside

Post by a16vwn1 »

pm mr2lover to see if he will send it you.
Top
Post Reply

Return to “Modifications”