REV 1 GT - @ Back Home

CRAIGROBBO · Post by **CRAIGROBBO** » Thu Sep 12, 2013 2:01 pm

Hi All,

Update....

I have managed to track down and purchase an Apexi Power FC ECU

Should get it next week then car will be going back to GTS-Chris to have it fitted and mapped

Cheers Craig

CRAIGROBBO · Post by **CRAIGROBBO** » Fri Sep 13, 2013 10:48 am

Hi All,

Little package just landed on my desk

Will be dropping the ECU off with GTS-Chris for testing and then arrange to get the car back in to have it all fitted and mapped

Cheers Craig

CRAIGROBBO · Post by **CRAIGROBBO** » Sat Sep 14, 2013 6:18 pm

The winter jacket been tried on for size! All fits well!.

Craig

wilki · Post by **wilki** » Tue Sep 17, 2013 2:10 pm

Like the winter jacket

Always keep thinking about getting one of them for abit of protection in the extra wet and cold months

CRAIGROBBO · Post by **CRAIGROBBO** » Wed Sep 18, 2013 7:47 am

wilki wrote:Like the winter jacket
Always keep thinking about getting one of them for abit of protection in the extra wet and cold months

Hi Wilki,

The cover was £150 and designed for a MKII and fits pretty snug!

This is a temporary measure until I get the garage cleared of all the crap!!

Cheers Craig

CRAIGROBBO · Post by **CRAIGROBBO** » Wed Sep 18, 2013 7:52 am

Hi All,

Small update..

I had the Apexi FC tested with GTS-Chris and had the all clear yesterday and now uploaded with the Apexi base map. Hope to get the car in over the next couple of weeks to get I t road maped

Also postman dropped my master cylinder brace off... Couldn't find a Cusco one so ordered from Tegiwa £35!!.

Cheers Craig

CRAIGROBBO · Post by **CRAIGROBBO** » Mon Sep 23, 2013 10:59 am

Hi All,

Update...

I dropped of the two front wheels at a local specialist to have the small buckles taken out, They rang this morning and all done! Should get them back on tonight.

The car has a Gizzmo MS-IBC which shows boost but decided to still buy another matching boost gauge in psi to fit in with the current gauges.

Also bought some puddle lights.

The car is booked in next week with GTS-Chris to have the Apexi mapped! Good times!!

Cheers Craig

CRAIGROBBO · Post by **CRAIGROBBO** » Mon Sep 23, 2013 2:50 pm

Ooop shiny oil cap!

Craig

CRAIGROBBO · Post by **CRAIGROBBO** » Mon Sep 23, 2013 7:50 pm

Oil cap fitted.....

cheers Craig

gazrev1tubby · Post by **gazrev1tubby** » Mon Sep 23, 2013 8:03 pm

Looking good Craig

CRAIGROBBO · Post by **CRAIGROBBO** » Mon Sep 23, 2013 10:28 pm

Also got a set of Rev 3 rear lights from RedMR2..

Dropped them off at me pals tonight to be machine polished! Get them nice and shiny again.

Decided to keep the Rev 1 center panel with the El-Glo badge, so will be moddifying it a little to suit the curve on the new lights. Hope to get them fitted this weekend.

Craig

ashley · Post by **ashley** » Mon Sep 23, 2013 10:36 pm

CRAIGROBBO wrote:

I like that...nice colour

philmr2 · Post by **philmr2** » Mon Sep 23, 2013 10:50 pm

Looking really nice the body kit compliments the car well, out of curiosity where did you get the number plates from as i want my rear plate reg to be on one line it looks alot neater.

gazrev1tubby · Post by **gazrev1tubby** » Tue Sep 24, 2013 6:42 am

You won't be able to modify the centre panel to fit bud, as its made from aluminium bars, that are affixed through the rev1/2 brackets. If you try and cut it, it'll fall to bits

CRAIGROBBO · Post by **CRAIGROBBO** » Tue Sep 24, 2013 8:15 am

philmr2 wrote:Looking really nice the body kit compliments the car well, out of curiosity where did you get the number plates from as i want my rear plate reg to be on one line it looks alot neater.

Hi Phil,

I got the front plate online (http://www.gbshowplates.co.uk/) the plate size is 13" x 4.4"

Cheers Craig

CRAIGROBBO · Post by **CRAIGROBBO** » Tue Sep 24, 2013 8:17 am

gazrev1tubby wrote:You won't be able to modify the centre panel to fit bud, as its made from aluminium bars, that are affixed through the rev1/2 brackets. If you try and cut it, it'll fall to bits

D'oh....... Re-think lol.

CRAIGROBBO · Post by **CRAIGROBBO** » Thu Sep 26, 2013 5:40 pm

Hi All,

Got a few more things done today, nothing major like.

Been down to Sunderland to have some professional photos taken of the 2 by DBNE photography. Was pretty good and the weather was really nice, should get the finished shots next weekend.

Replaced the rear cusco brace sticker with a new one.

Also wrapped the plastic around the gear gator with some 3M Carbon Wrap.

Tomorrow's job is to fit the master cylinder brace / wire in the puddle ligts and start to fit the new boost gauge.

Cheers Craig

CRAIGROBBO · Post by **CRAIGROBBO** » Wed Oct 02, 2013 4:31 pm

Hi All,

have not getting round to start the planed jobs as yet....

But the 2 is going back to see GTS-Chris next tuesday to have the Apexi FC fitted and maped

Also a quick last few pic's before the winter sets in....

Cheers Craig

craig · Post by **craig** » Wed Oct 02, 2013 6:11 pm

Car looks fantastic mate!

gazrev1tubby · Post by **gazrev1tubby** » Thu Oct 03, 2013 4:31 pm

Stunner

www.imoc.co.uk

REV 1 GT - @ Back Home

Re: REV 1 GT - @ Back Home

Re: REV 1 GT - @ Back Home

Re: REV 1 GT - @ Back Home

Re: REV 1 GT - @ Back Home

Re: REV 1 GT - @ Back Home

Re: REV 1 GT - @ Back Home

Re: REV 1 GT - @ Back Home

Re: REV 1 GT - @ Back Home

Re: REV 1 GT - @ Back Home

Re: REV 1 GT - @ Back Home

Re: REV 1 GT - @ Back Home

Re: REV 1 GT - @ Back Home

Re: REV 1 GT - @ Back Home

Re: REV 1 GT - @ Back Home

Re: REV 1 GT - @ Back Home

Re: REV 1 GT - @ Back Home

Re: REV 1 GT - @ Back Home

Re: REV 1 GT - @ Back Home

Re: REV 1 GT - @ Back Home

Re: REV 1 GT - @ Back Home