Mk2 S-Style Side Ducts in Carbon Fibre
Moderators: IMOC Moderators, IMOC Committee Members
-
- Posts: 833
- Joined: Sat Dec 12, 2009 2:59 am
- Location: Scotland
Re: Mk2 S-Style Side Ducts in Carbon Fibre
I'm not sure Dude,you could PM Ben & ask him
I hope it is all the better for all concerned if it is...
I hope it is all the better for all concerned if it is...
-
- Posts: 400
- Joined: Mon Feb 07, 2005 11:53 am
- Location: Rotterdam, The Netherlands
- Contact:
Re: Mk2 S-Style Side Ducts in Carbon Fibre
PM send to Ben..
-
- Posts: 833
- Joined: Sat Dec 12, 2009 2:59 am
- Location: Scotland
Re: Mk2 S-Style Side Ducts in Carbon Fibre
Yes,i will too
Let me know what he says Dude
Re: Mk2 S-Style Side Ducts in Carbon Fibre
ok well ill give them a miss for now, ill see if it will be possible to fit them after having the work done
-
- Posts: 833
- Joined: Sat Dec 12, 2009 2:59 am
- Location: Scotland
Re: Mk2 S-Style Side Ducts in Carbon Fibre
timmomr2 wrote:ok well ill give them a miss for now, ill see if it will be possible to fit them after having the work done
What make of side skirts do you have on your 2 m8 ??
-
- Posts: 400
- Joined: Mon Feb 07, 2005 11:53 am
- Location: Rotterdam, The Netherlands
- Contact:
Re: Mk2 S-Style Side Ducts in Carbon Fibre
reddev1ll09 wrote:
Yes,i will too
Let me know what he says Dude
Anwser from Ben:
Hi Arthur, you can have 15% off I am not bothered if its cross forums or not at the end of the day its still 15+ orders
So we'll all have a 15% discount
-
- Posts: 833
- Joined: Sat Dec 12, 2009 2:59 am
- Location: Scotland
Re: Mk2 S-Style Side Ducts in Carbon Fibre
That is excellent news..
Good bit of thinking on your part,Dude
Good bit of thinking on your part,Dude
Re: Mk2 S-Style Side Ducts in Carbon Fibre
i think my shirts are phoenix power replicas. there simelar to the bomex but have a bit running up to the side strip behind the front wheel rather than a small lump like the bomex
-
- Posts: 833
- Joined: Sat Dec 12, 2009 2:59 am
- Location: Scotland
Re: Mk2 S-Style Side Ducts in Carbon Fibre
I was enquiring because Ben has only tried fitting them to Oem (fitted) Bomex (fitted) Toms (didn't fit)
So if they are very similar to Bomex,they should fit.
So if they are very similar to Bomex,they should fit.
Re: Mk2 S-Style Side Ducts in Carbon Fibre
ye i think they will fit the vent looks the same, problem is everything is being blended to the car so i wont be able to take the skirts off once its done
-
- Posts: 833
- Joined: Sat Dec 12, 2009 2:59 am
- Location: Scotland
Re: Mk2 S-Style Side Ducts in Carbon Fibre
That's good buddy,
Are you wanting to blend the ducts in too ?
If you are,you should find out from Ben (CarBenFibreCreations) if he does the side ducts in fibre glass aswell,they will be a tad cheaper to than the carbon ones.
Are you wanting to blend the ducts in too ?
If you are,you should find out from Ben (CarBenFibreCreations) if he does the side ducts in fibre glass aswell,they will be a tad cheaper to than the carbon ones.
Re: Mk2 S-Style Side Ducts in Carbon Fibre
no im not after blending them in but by the looks of things there is a clip that goes on the inside of the vent and i wont be able to take the vent off to fit the scoop
-
- Posts: 833
- Joined: Sat Dec 12, 2009 2:59 am
- Location: Scotland
Re: Mk2 S-Style Side Ducts in Carbon Fibre
Edit...
Last edited by reddev1ll09 on Tue Mar 09, 2010 1:27 am, edited 4 times in total.
-
- Posts: 400
- Joined: Mon Feb 07, 2005 11:53 am
- Location: Rotterdam, The Netherlands
- Contact:
Re: Mk2 S-Style Side Ducts in Carbon Fibre
If they don't fit, Ben will take them back, no problem.
A Belgium member ordered in the Dutch GB for his Kaminari's under that condition.
A Belgium member ordered in the Dutch GB for his Kaminari's under that condition.
-
- Posts: 833
- Joined: Sat Dec 12, 2009 2:59 am
- Location: Scotland
Re: Mk2 S-Style Side Ducts in Carbon Fibre
timmomr2 wrote:no im not after blending them in but by the looks of things there is a clip that goes on the inside of the vent and i wont be able to take the vent off to fit the scoop
Aw right i know what you mean...
There will be someway of getting round this problem m8. I had a look at the pic's & by my estimate the clip at the top will Not need screwed or bolted,it would only be the bottom part that would need fixing & this could be dun without having to take the side vent off atoll
Yes your right surferdude,he will..One of the members in the GB has ordered them under these conditions aswell (if they don't fit Ben will give a refund as long as they are in perfect order on return to him)
Thanks surferdude i forgot to mention this
Small update for timmomr2.....
-
- Posts: 833
- Joined: Sat Dec 12, 2009 2:59 am
- Location: Scotland
Re: Mk2 S-Style Side Ducts in Carbon Fibre
Afternoon everybody concerned.Good news,Ben has the first 5 sets of ducts in
So could the following people please send Me or Ben (Ben's link below)
http://www.imoc.co.uk/forums/profile.ph ... le&u=10903
with your email address so that you can be invoiced for the side ducts
1.bolton
2.clarky
3.acstreet
4.Rev2rich
5.dantheman
I will pm you all aswell just encase anybody doesn't notice the thread
Ben has told me that the ducts have a shine to them,so plz check the link below before sending your email address & let me know if you are still wanting them (i think they look great)
http://www.carbenfibrecreations.co.uk/p ... roduct=220
So could the following people please send Me or Ben (Ben's link below)
http://www.imoc.co.uk/forums/profile.ph ... le&u=10903
with your email address so that you can be invoiced for the side ducts
1.bolton
2.clarky
3.acstreet
4.Rev2rich
5.dantheman
I will pm you all aswell just encase anybody doesn't notice the thread
Ben has told me that the ducts have a shine to them,so plz check the link below before sending your email address & let me know if you are still wanting them (i think they look great)
http://www.carbenfibrecreations.co.uk/p ... roduct=220
-
- Posts: 833
- Joined: Sat Dec 12, 2009 2:59 am
- Location: Scotland
Re: Mk2 S-Style Side Ducts in Carbon Fibre
The next batch of side ducts will be ready within about three weeks
-
- Posts: 1257
- Joined: Thu Jul 26, 2007 12:12 pm
- Location: Leeds
Re: Mk2 S-Style Side Ducts in Carbon Fibre
Invoices sent, thanks guys.
As posted above if anyone buys a pair of ducts and isnt happy in any way with them I will offer a full refund but only on non fitted items so we can sell them on again. In regards to the lip on the rear of the ducts if this doesnt fit you can cut it off to make the ducts fit flush, once they are on the car you wont see the backs jsut make sure to use lots of contact adhesive or whatever you choose to bond to the car so they dont come off at high speeds
As posted above if anyone buys a pair of ducts and isnt happy in any way with them I will offer a full refund but only on non fitted items so we can sell them on again. In regards to the lip on the rear of the ducts if this doesnt fit you can cut it off to make the ducts fit flush, once they are on the car you wont see the backs jsut make sure to use lots of contact adhesive or whatever you choose to bond to the car so they dont come off at high speeds
Our Discounts/Specials:
http://www.carbenfibrecreations.co.uk/specials
http://www.carbenfibrecreations.co.uk/specials
Re: Mk2 S-Style Side Ducts in Carbon Fibre
post some pics when you have fitted them people . also let me know if its possible to fit them without removing the vent as my skirts are about to be fully blended into the car )