It's back !! - ESSEX ROLLING ROAD DAY III

Reports and Feedback from MR2 related events

Moderators: IMOC Moderators, IMOC Committee Members

Post Reply
Rory
Posts: 2969
Joined: Tue Dec 14, 2004 12:03 pm
Location: Herts

Re: It's back !! - ESSEX ROLLING ROAD DAY III

Post by Rory »

stewyH wrote:If there is any space left i'd be up for sticking my 2 on the rollers. Its never been on the rollers, so it would be good to see whats happening.

If no space then, just the convoy for me.


Im sure there will be space. A few people have dropped out and there is alsways a few people that dont turn up. Im sure if you come along you will get on the rollers

Rory
My MR2 for sale! Check out the for sale section
jonb-
Posts: 4634
Joined: Sat May 21, 2005 2:33 pm
Location: hitchin, north hertfordshire
Contact:

Re: It's back !! - ESSEX ROLLING ROAD DAY III

Post by jonb- »

Now, this might sound anal but could we please have an F1 amnesty?

While the race is on live at 6am i really DO NOT want to know the result until the re-run, so anyone knowing the result please please please be careful with how you shout it about.

thanks :)

jon (who'll be arriving in a breadvan type r :()
Mark Edwards
Posts: 11298
Joined: Wed Dec 15, 2004 9:27 am
Location: Eastbourne
Contact:

Re: It's back !! - ESSEX ROLLING ROAD DAY III

Post by Mark Edwards »

jonb- wrote:jon (who'll be arriving in a breadvan type r :()

Hope you can keep up. :P
Image
xxxx, AM TUNING, sbITs
jonb-
Posts: 4634
Joined: Sat May 21, 2005 2:33 pm
Location: hitchin, north hertfordshire
Contact:

Re: It's back !! - ESSEX ROLLING ROAD DAY III

Post by jonb- »

Mark Edwards wrote:
jonb- wrote:jon (who'll be arriving in a breadvan type r :()

Hope you can keep up. :P


It's marginally quicker than my NA (vtec'ing is an interesting experience) but the tubby would eat it for lunch.

That said, from point a to point b down the right road (read bumpy and twisty) i think the breadvan would embarrass a few of the lesser mr2 drivers, myself included.
Mark Edwards
Posts: 11298
Joined: Wed Dec 15, 2004 9:27 am
Location: Eastbourne
Contact:

Re: It's back !! - ESSEX ROLLING ROAD DAY III

Post by Mark Edwards »

jonb- wrote:
Mark Edwards wrote:
jonb- wrote:jon (who'll be arriving in a breadvan type r :()

Hope you can keep up. :P


It's marginally quicker than my NA (vtec'ing is an interesting experience) but the tubby would eat it for lunch.

That said, from point a to point b down the right road (read bumpy and twisty) i think the breadvan would embarrass a few of the lesser mr2 drivers, myself included.

Wanna race? 8)
Image
xxxx, AM TUNING, sbITs
Matty_GTS
Posts: 1146
Joined: Tue May 31, 2005 11:28 pm
Location: Rayleigh, Essex

Re: It's back !! - ESSEX ROLLING ROAD DAY III

Post by Matty_GTS »

6 hours out in the cold but my baby is finally clean!!

Washed, Washed again, cut, polished, waxed. detailed .... phew!!!

First tim using meguires stuff anf its great!

Out on the p1$$ now so hope i wake up!!! lol

See ya bright and early guys
Mark Edwards
Posts: 11298
Joined: Wed Dec 15, 2004 9:27 am
Location: Eastbourne
Contact:

Re: It's back !! - ESSEX ROLLING ROAD DAY III

Post by Mark Edwards »

Matty_GTS wrote:6 hours out in the cold but my baby is finally clean!!

Washed, Washed again, cut, polished, waxed. detailed .... phew!!!

First tim using meguires stuff anf its great!

Out on the p1$$ now so hope i wake up!!! lol

See ya bright and early guys

Lets just hope it doesn't rain. [-o<
Image
xxxx, AM TUNING, sbITs
steve
Posts: 1478
Joined: Tue Dec 14, 2004 3:35 pm
Location: Kent
Contact:

Re: It's back !! - ESSEX ROLLING ROAD DAY III

Post by steve »

Mark Edwards wrote:
Matty_GTS wrote:6 hours out in the cold but my baby is finally clean!!

Washed, Washed again, cut, polished, waxed. detailed .... phew!!!

First tim using meguires stuff anf its great!

Out on the p1$$ now so hope i wake up!!! lol

See ya bright and early guys

Lets just hope it doesn't rain. [-o<


i'm hoping for rain, might clean mine up abit :lol:

just changed the dizzy cap/rotor arm - 2 of the electrode thingies were about half the size they were 10k miles ago :-k

just took it for a spin, picks up better now 8-[
Mark Edwards
Posts: 11298
Joined: Wed Dec 15, 2004 9:27 am
Location: Eastbourne
Contact:

Re: It's back !! - ESSEX ROLLING ROAD DAY III

Post by Mark Edwards »

steve wrote:
Mark Edwards wrote:
Matty_GTS wrote:6 hours out in the cold but my baby is finally clean!!

Washed, Washed again, cut, polished, waxed. detailed .... phew!!!

First tim using meguires stuff anf its great!

Out on the p1$$ now so hope i wake up!!! lol

See ya bright and early guys

Lets just hope it doesn't rain. [-o<


i'm hoping for rain, might clean mine up abit :lol:

just changed the dizzy cap/rotor arm - 2 of the electrode thingies were about half the size they were 10k miles ago :-k

just took it for a spin, picks up better now 8-[

Finally got round to fitting my copper contact one yesterday, does feel a bit better for it.
Image
xxxx, AM TUNING, sbITs
Spacey

Re: It's back !! - ESSEX ROLLING ROAD DAY III

Post by Spacey »

went out to clean mine today. Managed to do the driver side door before I decided it was too cold and going to the pub was a much better option!

Now the driver side of the car is stunning deep polished red and the passenger side is a more dull pink #-o :lol: :lol:
RyanRs
Posts: 4458
Joined: Sun Sep 25, 2005 12:05 pm
Location: Medway,Kent

Re: It's back !! - ESSEX ROLLING ROAD DAY III

Post by RyanRs »

ARRRRRRRG!! i got up at 6am sat morn (yesterday) cleaned me car till 7:30, got to the rolling road a hour n alf drive later, then i realised the RR sesh is on SUNDAY!!! not SATURDAY!!! ARRRRRRGGGG!!!


but not to worry, ill still be up for it sunday too :P

hehehe, (im such a blond xxxx :@:@)
tonigmr2
IMOC Committee
Posts: 18054
Joined: Wed Dec 15, 2004 2:30 pm
Location: Here

Re: It's back !! - ESSEX ROLLING ROAD DAY III

Post by tonigmr2 »

Numpty :P
Mark Edwards
Posts: 11298
Joined: Wed Dec 15, 2004 9:27 am
Location: Eastbourne
Contact:

Re: It's back !! - ESSEX ROLLING ROAD DAY III

Post by Mark Edwards »

RyanRs wrote:ARRRRRRRG!! i got up at 6am sat morn (yesterday) cleaned me car till 7:30, got to the rolling road a hour n alf drive later, then i realised the RR sesh is on SUNDAY!!! not SATURDAY!!! ARRRRRRGGGG!!!


but not to worry, ill still be up for it sunday too :P

hehehe, (im such a blond twit :@:@)

=D> Classic. =D>
Image
xxxx, AM TUNING, sbITs
jonb-
Posts: 4634
Joined: Sat May 21, 2005 2:33 pm
Location: hitchin, north hertfordshire
Contact:

Re: It's back !! - ESSEX ROLLING ROAD DAY III

Post by jonb- »

RyanRs wrote:ARRRRRRRG!! i got up at 6am sat morn (yesterday) cleaned me car till 7:30, got to the rolling road a hour n alf drive later, then i realised the RR sesh is on SUNDAY!!! not SATURDAY!!! ARRRRRRGGGG!!!


but not to worry, ill still be up for it sunday too :P

hehehe, (im such a blond twit :@:@)


WINNER
Matty_GTS
Posts: 1146
Joined: Tue May 31, 2005 11:28 pm
Location: Rayleigh, Essex

Re: It's back !! - ESSEX ROLLING ROAD DAY III

Post by Matty_GTS »

Was a great day ... thanks to Frank for organising it!!
steve
Posts: 1478
Joined: Tue Dec 14, 2004 3:35 pm
Location: Kent
Contact:

Re: It's back !! - ESSEX ROLLING ROAD DAY III

Post by steve »

another great day, cheers Frank :D

202 rwhp 244 lbft with the dep2 pro & 3" downpipe.

up 2 rwhp & 17 lbft since the standard run, peak power was 200rpm lower though :?

will findout what boost its running next week :lol:
Matty_GTS
Posts: 1146
Joined: Tue May 31, 2005 11:28 pm
Location: Rayleigh, Essex

Re: It's back !! - ESSEX ROLLING ROAD DAY III

Post by Matty_GTS »

252 rwhp and 268 lbft so im quite happy.

Once i sort ou the bost leak that makes it should like a jumbo jet and weld the down pipe then i should be getting just a little bit more.

Mapping in april so will be good to see!
jonb-
Posts: 4634
Joined: Sat May 21, 2005 2:33 pm
Location: hitchin, north hertfordshire
Contact:

Re: It's back !! - ESSEX ROLLING ROAD DAY III

Post by jonb- »

Matty_GTS wrote:Was a great day ... thanks to Frank for organising it!!


Second.

Laugh of the day was certianly the vielside mr2 bouncing around in the convoy :mrgreen:
RyanRs
Posts: 4458
Joined: Sun Sep 25, 2005 12:05 pm
Location: Medway,Kent

Re: It's back !! - ESSEX ROLLING ROAD DAY III

Post by RyanRs »

was a kool day! glad i found the effort to come again after turning up a day late !! lol not sure if im glad with my result, car seriously needs mapping,and the cat is still on there, but i got 310bhp flywheel & 245.6 lbft torque.

where did everyone go on the way home (thats the thoruck peops) cos i was following mark edwards and whoever owns the purple rev3 , and they went into a but, but the rest had dissapeard?


Hey JonB , stop laughing at my mr2 Bling Bling 50cent pimp machine , thoes wer hydrulics (sp?) lol -dam JIC's :@
westmc

Re: It's back !! - ESSEX ROLLING ROAD DAY III

Post by westmc »

thanks for a great day everyone my little starlet produced 112BHP @ the wheels, 146BHP @ the flywheel and 146.2 LB/FT torque
Post Reply

Return to “Past Events”