Hi Guys,
Just have a MR2 that has a weak handbrake. I've changed the cables etc but still quite weak could it be the calipers just not biting enough...anyone have any ideas?
handbrake issue
Moderators: IMOC Moderators, IMOC Committee Members
handbrake issue
MR2 Night Fox
Re: handbrake issue
if you have fitted new cables it probably just needs adjusting
did you leave the adjustment rod alone? (before and after fitting cables)
did you leave the adjustment rod alone? (before and after fitting cables)
Re: handbrake issue
adjustment rod? I did tighten this after i installed it but seems to loosen up over several months...
MR2 Night Fox
Re: handbrake issue
si2040 wrote:adjustment rod? I did tighten this after i installed it but seems to loosen up over several months...
just to make sure we are on the same page, threaded rod with 2 x 12mm nuts and a spring on the end and goes through a plate that the cables attatch to
Re: handbrake issue
MR2 handbrake cables always go in winter. They're pants
Re: handbrake issue
Try the guide on here http://www.imoc.co.uk/forums/viewtopic. ... ake+nobble. There is another version posted by Paul too but I can't find that one, I did this 2 weeks ago to get it to pass MOT. Worked a treat