![](./images/smilies/spacer.gif)
I've completed my charge cooler conversion today, But I'm not really happy with the pump, When I take the charge cooler lid of I can not hear it whoosing inside the cooler, I can hear the pump, its only a slight noise,
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
If I squeeze the hoses at the rad the coolant inside the core geos up and down, and after a run the rad was cold, theres no leaks or anything,so when you guys run your charge cooler pump with the lid of, do you hear it swishing around?
![](./images/smilies/spacer.gif)
heres how my pipes are connected,
![](./images/smilies/spacer.gif)
top rad outlet to the CC pump, connection in the middle of the pump
![](./images/smilies/spacer.gif)
throttle body side core outlet to the pump far outside connection,
![](./images/smilies/spacer.gif)
I basicaly connected it as the st205 EPC shows, I wired the pump in Pink Live, and black as negative, I connected it by wiring it up to where the fan would connect to and disconnected the temp sensor so the pump runs 24/7