Looks like a good product. Have you designed it in the sense that the rain wont get into the engine bay, i.e runoff tray?
Just wondering as i know a few of the other kits on the market (so ive heard) can let water in.
Engine Shroud with Dual 11" Spals
Moderators: IMOC Moderators, IMOC Committee Members
Re: Engine Shroud with Dual 11" Spals
Hi Graeme ill put my name down exactly the right time for me
1. Gtech
2. irish_dan
3. KrisB
1. Gtech
2. irish_dan
3. KrisB
Re: Engine Shroud with Dual 11" Spals
Will keep you posted Kris, the engineering sample arrives tomorrow morning and I will check it out tomorrow night, once I give them the thumbs up we are talking a week or so.
Graeme
Graeme
Berk Tech IC, Berk Tech Downpipe, Berk Tech Exhaust, ARC Induction System, DevilsOwn Water/Meth Injection (Pre & Post turbo). TRD Cold Pipe, EMS Powered Digital Boost Gauge, TRD Strut Braces, Innovate O2, Blitz SBC i-color EBC - "ARCH ROLLER FOR HIRE"
Re: Engine Shroud with Dual 11" Spals
Hows this going? I'd be interested in one
Re: Engine Shroud with Dual 11" Spals
The engineering piece came back on Tuesday and looks damm fantastic, had a slight change made with a couple of more bolt holes, production pieces should be here end of next week along with the fans, I can then let everyone know a confirmed price.
HTH
Graeme
HTH
Graeme
Berk Tech IC, Berk Tech Downpipe, Berk Tech Exhaust, ARC Induction System, DevilsOwn Water/Meth Injection (Pre & Post turbo). TRD Cold Pipe, EMS Powered Digital Boost Gauge, TRD Strut Braces, Innovate O2, Blitz SBC i-color EBC - "ARCH ROLLER FOR HIRE"
Re: Engine Shroud with Dual 11" Spals
Good work bud, keep us posted
-
- Posts: 2114
- Joined: Sun Sep 10, 2006 8:41 pm
- Location: Blackburn (Home of the mighty Rovers)
Re: Engine Shroud with Dual 11" Spals
Looks good, possible interst from me all depending on price as i was going to attempt one myself
Re: Engine Shroud with Dual 11" Spals
Yep been meaning to do it for a while, the engineering piece looks superb, couple of members have been down the house and seen it and were blown away with the quality of finish.
I'm away next week, but by the time I get back, all the others will be here along with Fans and relays. Will then be able to work out the final price and get them sold.
I am hoping to make them up really cheap, I have a job that gives me a decent wage so not looking to make profit on this project, just like the chance to do something different and spread the results around a bit, and of course bling up my own bay at the same time
I'm away next week, but by the time I get back, all the others will be here along with Fans and relays. Will then be able to work out the final price and get them sold.
I am hoping to make them up really cheap, I have a job that gives me a decent wage so not looking to make profit on this project, just like the chance to do something different and spread the results around a bit, and of course bling up my own bay at the same time
Berk Tech IC, Berk Tech Downpipe, Berk Tech Exhaust, ARC Induction System, DevilsOwn Water/Meth Injection (Pre & Post turbo). TRD Cold Pipe, EMS Powered Digital Boost Gauge, TRD Strut Braces, Innovate O2, Blitz SBC i-color EBC - "ARCH ROLLER FOR HIRE"
Re: Engine Shroud with Dual 11" Spals
gtech wrote:so not looking to make profit on this project, just like the chance to do something different and spread the results around a bit
That's brilliant to see, Graeme. There's too many so called people who are in for profit and hide behind a thin veneer of enthusiasm.
They look superb and judging by the other parts you've been selling, the quality will be bob on.
Once I know the clearances on my car with the new build, I'll be in for some bits and pieces - we can talk over @ WS one weekend
3.4ltr V6 Turbo. Built by Woodsport. Controlled by Syvecs, mapped by Ryan. 420bhp @ 0.7bar from 2400rpm
Re: Engine Shroud with Dual 11" Spals
Add me to the list!
1. Gtech
2. irish_dan
3. KrisB
4. Grajey
I must finish fitting that boost gauge this weekend!
1. Gtech
2. irish_dan
3. KrisB
4. Grajey
I must finish fitting that boost gauge this weekend!
Re: Engine Shroud with Dual 11" Spals
Johnny G wrote:gtech wrote:so not looking to make profit on this project, just like the chance to do something different and spread the results around a bit
That's brilliant to see, Graeme. There's too many so called people who are in for profit and hide behind a thin veneer of enthusiasm.
They look superb and judging by the other parts you've been selling, the quality will be bob on.
Once I know the clearances on my car with the new build, I'll be in for some bits and pieces - we can talk over @ WS one weekend
Thanks for the kind words Johnny, will keep you posted, and yep def up for a meet at WS
Graeme
Berk Tech IC, Berk Tech Downpipe, Berk Tech Exhaust, ARC Induction System, DevilsOwn Water/Meth Injection (Pre & Post turbo). TRD Cold Pipe, EMS Powered Digital Boost Gauge, TRD Strut Braces, Innovate O2, Blitz SBC i-color EBC - "ARCH ROLLER FOR HIRE"
Re: Engine Shroud with Dual 11" Spals
Add me to the list although it does depend on the final price. If it's under or around the £200 mark I'm definately in.
1. Gtech
2. irish_dan
3. KrisB
4. Grajey
5. Ed
1. Gtech
2. irish_dan
3. KrisB
4. Grajey
5. Ed
Re: Engine Shroud with Dual 11" Spals
1. Gtech
2. irish_dan
3. KrisB
4. Grajey
5. Ed
6. Njdoom
2. irish_dan
3. KrisB
4. Grajey
5. Ed
6. Njdoom
Re: Engine Shroud with Dual 11" Spals
As Ive said on another site Im very interested, but have another question lol, what is the trigger for switching the fans on? Do you have them on a switch and just switch them on when you want, or do they run all the time, or are they running on the same switch that switches the intercooler fan on?
Re: Engine Shroud with Dual 11" Spals
1. Gtech
2. irish_dan
3. KrisB
4. Grajey
5. Ed
6. Njdoom
7. Tiny
Price dependant sorry if i was abit of a nob earlier
2. irish_dan
3. KrisB
4. Grajey
5. Ed
6. Njdoom
7. Tiny
Price dependant sorry if i was abit of a nob earlier
Re: Engine Shroud with Dual 11" Spals
Hi Everyone, thanks for the support on this project. Just to keep you all up to speeed, I am away for 10 days from today, but during that time the final bits will be getting done on the engineering piece, etc.
When I return I will have confirmed pricing on everything, and the intention will be to submit the order for manufacturing on Monday 15th Sept. That way we should have the kits for the following week.
I know it seems ages away, but time will fly
Thanks
Graeme
When I return I will have confirmed pricing on everything, and the intention will be to submit the order for manufacturing on Monday 15th Sept. That way we should have the kits for the following week.
I know it seems ages away, but time will fly
Thanks
Graeme
Berk Tech IC, Berk Tech Downpipe, Berk Tech Exhaust, ARC Induction System, DevilsOwn Water/Meth Injection (Pre & Post turbo). TRD Cold Pipe, EMS Powered Digital Boost Gauge, TRD Strut Braces, Innovate O2, Blitz SBC i-color EBC - "ARCH ROLLER FOR HIRE"
Re: Engine Shroud with Dual 11" Spals
1. Gtech
2. irish_dan
3. KrisB
4. Grajey
5. Ed
6. Njdoom
7. Tiny
8. Nikaiyo
Subject to price and nothing going wrong with car between now and then if you know what i mean
2. irish_dan
3. KrisB
4. Grajey
5. Ed
6. Njdoom
7. Tiny
8. Nikaiyo
Subject to price and nothing going wrong with car between now and then if you know what i mean
Re: Engine Shroud with Dual 11" Spals
1. Gtech
2. irish_dan
3. KrisB
4. Grajey
5. Ed
6. Njdoom
7. Tiny
8. Nikaiyo
9. RyanRs
ALSO Subject to price and nothing going wrong with car between now and then if you know what i mean
2. irish_dan
3. KrisB
4. Grajey
5. Ed
6. Njdoom
7. Tiny
8. Nikaiyo
9. RyanRs
ALSO Subject to price and nothing going wrong with car between now and then if you know what i mean
Re: Engine Shroud with Dual 11" Spals
1. Gtech
2. irish_dan
3. KrisB
4. Grajey
5. Ed
6. Njdoom
7. Tiny
8. Nikaiyo
9. RyanRs
10. Dan88
Thanks to Nikaiyo for picking my topic up in the wanted section asking for the exact same product that your manufactuing. Its perfect timing and i will definatly be interested, again subject to price
2. irish_dan
3. KrisB
4. Grajey
5. Ed
6. Njdoom
7. Tiny
8. Nikaiyo
9. RyanRs
10. Dan88
Thanks to Nikaiyo for picking my topic up in the wanted section asking for the exact same product that your manufactuing. Its perfect timing and i will definatly be interested, again subject to price
Re: Engine Shroud with Dual 11" Spals
1. Gtech
2. irish_dan
3. KrisB
4. Grajey
5. Ed
6. Njdoom
7. Tiny
8. Nikaiyo
9. RyanRs
10. Dan88
11. welsh_mr2_kroozer
depending on the final price and wether i can get it powder coated green
2. irish_dan
3. KrisB
4. Grajey
5. Ed
6. Njdoom
7. Tiny
8. Nikaiyo
9. RyanRs
10. Dan88
11. welsh_mr2_kroozer
depending on the final price and wether i can get it powder coated green