[Mk2] [Generic] Need quick hepl please? -Top mounts

Anything and everything to do with mechanical issues with your Mk2

Moderators: IMOC Moderators, IMOC Committee Members

Post Reply
SevenR
Posts: 55
Joined: Tue Aug 08, 2006 3:03 pm
Location: Clarkston, Glasgow

[Mk2] [Generic] Need quick hepl please? -Top mounts

Post by SevenR »

Do Rev 2 fit Rev 1 or are they different?

Thanks.
luthor1
Posts: 2452
Joined: Sat Nov 05, 2005 7:03 pm
Location: Southampton

Re: [Mk2] [Generic] Need quick hepl please? -Top mounts

Post by luthor1 »

I think they're the same mate. I should know - I've changed both!!

Andy
BLZ-8027
Posts: 5038
Joined: Fri Aug 11, 2006 6:46 pm
Location: leicester

Re: [Mk2] [Generic] Need quick hepl please? -Top mounts

Post by BLZ-8027 »

I put rev 3s on my rev 1 ,no difference that i could see ?
raptor95GTS
Posts: 6213
Joined: Tue Dec 14, 2004 7:14 pm
Location: glasgow
Contact:

Re: [Mk2] [Generic] Need quick hepl please? -Top mounts

Post by raptor95GTS »

showing as different part numbers for

48609-17030 for 8911-9311 and
48609-17040 for 9311-9908
3sgte
Posts: 2731
Joined: Sat Sep 10, 2005 10:44 pm
Location: sunny suffolk

Re: [Mk2] [Generic] Need quick hepl please? -Top mounts

Post by 3sgte »

i thinnk the difference is the rev1/2 have the strut hole slightly offset and rev3 have it in the centre ,i doubt it would make enough difference to worry about ,just as long as you changed an axle pair at the same time

iirc the rear top mounts on a rev3 had longer studs aswell becaus they had stregthening bits on the top of the rear strut towers again this won't make a difference
BLZ-8027
Posts: 5038
Joined: Fri Aug 11, 2006 6:46 pm
Location: leicester

Re: [Mk2] [Generic] Need quick hepl please? -Top mounts

Post by BLZ-8027 »

Just remembered as well ,isnt there is an extra bracket on the later ones for
the ABS pipes?
Post Reply

Return to “Mechanical”