[Mk2] [Turbo] just fitted a blitz boost controller and over boost protector cuts in!!!! HELP
Moderators: IMOC Moderators, IMOC Committee Members
[Mk2] [Turbo] just fitted a blitz boost controller and over boost protector cuts in!!!! HELP
only way to reset is to take the ecu fuse out then put back in works for a while the protects again how can i get round this major problem thanks
Re: [Mk2] [Turbo] just fitted a blitz boost controller and over boost protector cuts in!!!! HELP
can you not just lower the settings on the boost controller and then buy a fuel cut defender and then retune them 

Re: [Mk2] [Turbo] just fitted a blitz boost controller and over boost protector cuts in!!!! HELP
boost controller is running at lowest level any ideas on where to get a fuel cut defender???
-
- Posts: 40
- Joined: Tue Oct 25, 2005 9:59 am
Re: [Mk2] [Turbo] just fitted a blitz boost controller and over boost protector cuts in!!!! HELP
Tim at xxxx.com has them for
£17 and in stock.


Regards

Solmansoft

Solmansoft
Re: [Mk2] [Turbo] just fitted a blitz boost controller and over boost protector cuts in!!!! HELP

triggermad4it wrote:boost controller is running at lowest level any ideas on where to get a fuel cut defender???


im sure i saw one in the for sale section during the last week.






if the boost controller is as low as it goes and your still over-boosting then it is either malfunctioning or has been wired up wrongly, try turning it off altogether to confirm.






then try running with the standard set up to make sure it runs ok to count out other possible issues.





Also, are you sure you have lowered both the set and the gain as either have the potential to cause overboost


Re: [Mk2] [Turbo] just fitted a blitz boost controller and over boost protector cuts in!!!! HELP
cheers for your help peeps fitted an hks fuel defence cutoff and its solved the problem thanks