hello

Create a post with details about your car.

Moderators: IMOC Moderators, IMOC Committee Members

axgizmo
Posts: 101
Joined: Thu Jan 31, 2008 1:31 pm
Location: Lancaster, Lancashire

Re: hello

Post by axgizmo »

shows how much i know, didnt know there was a difference, did you get them straight from Toyota then??
toxo
IMOC Committee
Posts: 11345
Joined: Tue May 30, 2006 5:41 pm
Location: The Toast Aisle
Contact:

Re: hello

Post by toxo »

My car came over from Japan with them on but you can get them from Toyota. They occasionally come up for sale on here as well, or in scrapyards - they were changed on all cars as of Rev4, not just imports. I don't have side by side pictures of them, but suffice to say that the Toyota ones look *just* like the ones you have at present, but not orange. The ebay ones look like the photos on ebay ;)

I've got absolutely no evidence to back this up but would suspect with the ebay ones, being a cheap aftermarket part, that you would run the risk of them being made of crapper plastic / being easier to break and not being a perfect fit? Especially considering how hard you have to lever them out to change a bulb. What do other people think?

Also something to bear in mind when changing your lights is that the new ones need to be certified for use in the UK (I think it's called an 'E Rating') otherwise you could fail your MOT.
cantfindausername
Posts: 9202
Joined: Tue Dec 14, 2004 12:15 pm
Location: Crawley, West Sussex
Contact:

Re: hello

Post by cantfindausername »

Image

Toyota vs. eBay

I've had mine for 6 years now, give or take a few months. No issues with removing them and they've been out plenty of times. Had many more issues with the pop in bit of my ex's stock Toyota lights.
Image
***RIP Car13 ***
*** Now in an Evo ***
axgizmo
Posts: 101
Joined: Thu Jan 31, 2008 1:31 pm
Location: Lancaster, Lancashire

Re: hello

Post by axgizmo »

the cables came!!!

but im getting my hair done and not seeing my bf tonight so my dad will probably attempt to fit them himself and give up lol! so probably wont get her back till tomorrow earliest

Ah well, cant wait lol!
cantfindausername
Posts: 9202
Joined: Tue Dec 14, 2004 12:15 pm
Location: Crawley, West Sussex
Contact:

Re: hello

Post by cantfindausername »

Its really not that bad of a job, have faith! :pray: :thumleft:
Image
***RIP Car13 ***
*** Now in an Evo ***
axgizmo
Posts: 101
Joined: Thu Jan 31, 2008 1:31 pm
Location: Lancaster, Lancashire

Re: hello

Post by axgizmo »

I've got it!!!! I am hactually cursed!!!

I actually do not believe it! Was driving to my fellas today at around 75 on the motorway and just as im about to come off at his Junction (I had my indicators on i was that close to coming off the M6) and steam pours out of my engine bay!!!!

I do the routine which is becoming a bit too common for my liking, Pull over stop, turn car off, Open engine cover and the cap on the radiator is bubbling away and there is steam pouring out! Grrrr!!

When my dad and his mechanic looked the car over they noticed the Fan was constantly on... It seems the pillock i bought the car off did this to (it appears) cover the fact that the car was over heating due to HG on its way out!

Can't believe the luck im having with this b*st*rd car!!! Least i can still drive it at the moment (short necessary journeys only tho!)

:roll: I got 2 days of driving it before it broke! #-o
axgizmo
Posts: 101
Joined: Thu Jan 31, 2008 1:31 pm
Location: Lancaster, Lancashire

Re: hello

Post by axgizmo »

Anyone know where i can find a write up on how to change the HG as there is no haynes? Cheers x
cantfindausername
Posts: 9202
Joined: Tue Dec 14, 2004 12:15 pm
Location: Crawley, West Sussex
Contact:

Re: hello

Post by cantfindausername »

Nasty business! Sorry you're having so much trouble. jimGTS did a good write up on his HG change, would be same in principle.

Stick at it though, its all worth it in the end.
Image
***RIP Car13 ***
*** Now in an Evo ***
axgizmo
Posts: 101
Joined: Thu Jan 31, 2008 1:31 pm
Location: Lancaster, Lancashire

Re: hello

Post by axgizmo »

It better be lol!
cantfindausername
Posts: 9202
Joined: Tue Dec 14, 2004 12:15 pm
Location: Crawley, West Sussex
Contact:

Re: hello

Post by cantfindausername »

Trust me. You have to keep the faith with these cars. I had a bill for £1509 3 weeks after getting my car, so I know where you're coming from.

Plus, a HG is a lot easier to fix than if the car was written off. So there are some people that have it a lot worse. Keep ya chin up, it will all come good soon :thumleft:
Image
***RIP Car13 ***
*** Now in an Evo ***
axgizmo
Posts: 101
Joined: Thu Jan 31, 2008 1:31 pm
Location: Lancaster, Lancashire

Re: hello

Post by axgizmo »

I've been doing a bit of research and maybe i was hasty in saying it could be the HG... Im now thinking it may just have an air lock... Going to check it over with dad tonight if possible
cantfindausername
Posts: 9202
Joined: Tue Dec 14, 2004 12:15 pm
Location: Crawley, West Sussex
Contact:

Re: hello

Post by cantfindausername »

Fingers crossed its a quicker fix eh!
Image
***RIP Car13 ***
*** Now in an Evo ***
axgizmo
Posts: 101
Joined: Thu Jan 31, 2008 1:31 pm
Location: Lancaster, Lancashire

Re: hello

Post by axgizmo »

Well, its confirmed! It was an airlock. Dad said his mechanic told him that i may get an airlock after a bit of driving since they drained everything then filled it all again.

Dad just forgot to tell me lol!
cantfindausername
Posts: 9202
Joined: Tue Dec 14, 2004 12:15 pm
Location: Crawley, West Sussex
Contact:

Re: hello

Post by cantfindausername »

Groov-tastic! See, all that worry for nothing! Now get out there and enjoy it!
Image
***RIP Car13 ***
*** Now in an Evo ***
toxo
IMOC Committee
Posts: 11345
Joined: Tue May 30, 2006 5:41 pm
Location: The Toast Aisle
Contact:

Re: hello

Post by toxo »

If you're still after clear lenses Munnsy's got some for sale: http://www.imoc.co.uk/forums/viewtopic.php?t=92304
axgizmo
Posts: 101
Joined: Thu Jan 31, 2008 1:31 pm
Location: Lancaster, Lancashire

Re: hello

Post by axgizmo »

Woo!

Thanks guys :)
Post Reply

Return to “Member Profiles”