Ok, so there are a lot of you that have rattley windows.

This is SERIOUSLY annoying!!

Especially when the window is half down.

I'd heard of people bending the brackets etc, but it's a simple cost free fix, without replacing the bushes.

First remove the door cards.

(Taking note of my last post about not breaking the door control panel!)

It's reeeaaally simple.

There are 2 brackets that prop the window, each with a small furry coating if you will.

Undo the bolt slightly, and move the bracket further towards the window, then, do said bolt up again.

And hey presto, the bush sits closer to the window.

If needed, file holes to move the bushes further out.

If you've moved them LOTS, then you may have an ickle problem getting the door cards back on.

In this case, bend slightly the top of the bracket, where the door card sits.

Hope this helps some people now the summer is nigh on upon us!

Luke