sorry you guys for the crap english
![](./images/smilies/spacer.gif)
i only just got the kit and was abit to excited
![](./images/smilies/spacer.gif)
.
![](./images/smilies/spacer.gif)
well i have manged to wire them up and all is working.
![](./images/smilies/spacer.gif)
this is what i have done.
![](./images/smilies/spacer.gif)
.
![](./images/smilies/spacer.gif)
.
![](./images/smilies/spacer.gif)
1 with the wiring loom there is a multi plug.
![](./images/smilies/spacer.gif)
that fits to the orignal light socket
![](./images/smilies/spacer.gif)
(this sets the relay to start up the hid on low beam)
![](./images/smilies/spacer.gif)
2 plug the loom in to the ballast and the ballast to the light
![](./images/smilies/spacer.gif)
(this supplies the hid with the power which is controled by the relay.
![](./images/smilies/spacer.gif)
3 now we got low beam sorted the only thing remaining is to set up is the flash lights.
![](./images/smilies/spacer.gif)
from the wiring loom on the multi plug are 2 wires which i can only assume control the flash light.
![](./images/smilies/spacer.gif)
from the bulb there are only 2 black wire which should be for the flash light.
![](./images/smilies/spacer.gif)
wire the blue and black from the
![](./images/smilies/spacer.gif)
(loom) multi plug to the black wires and.
![](./images/smilies/spacer.gif)
.
![](./images/smilies/spacer.gif)
.hey presto that should light up the fogs
![](./images/smilies/spacer.gif)
as for the other side
![](./images/smilies/spacer.gif)
(from the bulb) you should have 2 black wires like the other bulb.
![](./images/smilies/spacer.gif)
with one of the multi plugs they supply fit them in the hole parrallel to each other and plug in to
![](./images/smilies/spacer.gif)
multi plug socket from the car
![](./images/smilies/spacer.gif)
hope this is clearer.
![](./images/smilies/spacer.gif)
.
![](./images/smilies/spacer.gif)
.
![](./images/smilies/spacer.gif)
.
![](./images/smilies/spacer.gif)
it worked for me