![](./images/smilies/spacer.gif)
I have 15x7 rears with 35 offset so they fit further out by 10mm I believe
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
Whilst I'm asking anyone know if all bootlids intended for spoilers
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
![](./images/smilies/spacer.gif)
Thx for any info.
![](./images/smilies/spacer.gif)
R
Moderators: IMOC Moderators, IMOC Committee Members
BLZ-8027 wrote:Hi mate sorry to butt in on your thread but do you know if split rims have a different offset i;e outer and inner
rob shipp wrote:Hey all.
I have 15x7 rears with 35 offset so they fit further out by 10mm I believe(is this correct, standard is 45 on a
'90 uk t-bar?).
My question is can I use a 10mm spacer either side to bring them closer to the front look
(same wheel so 24mm further out than standard.
.
.looks just right in the arch).
What does this spacer do to the offset and is it ok for the rears.
Also where do i get
'em?
rob shipp wrote:Whilst I'm asking anyone know if all bootlids intended for spoilers(ie.
all revs) share the same holes for fixing the spoiler.
.
.
.
I know the 3 piece rev1 and 2 will have more holes.
![]()
Thx for any info.
R
Turbo-G wrote:BLZ-8027 wrote:Hi mate sorry to butt in on your thread but do you know if split rims have a different offset i;e outer and inner
Search for the deffinition of offset(on here somewhere I believe) and the answer will be blindingly obvious to you.
.
.
.
.
.and unless I am mistaking your question
(in which case someone will correct me) but the answer is
'no'.
Leeroy wrote:Well standard offsets are 35-> 38 on the Mk2.
![]()
![]()
cantfindausername wrote:isn't the 35-38 because people want wider wheels?![]()
Leeroy wrote:http://www.imoc.co.uk/forums/viewtopic. ... sc&start=0
Take a look at this sticky..
.
Appears the offset is probably 45, although its slightly confused!
Andy Jones wrote:Leeroy wrote:http://www.imoc.co.uk/forums/viewtopic. ... sc&start=0
Take a look at this sticky..
.
Appears the offset is probably 45, although its slightly confused!
Start off a sticky with the wrong info![]()
I ammended a bit futher down
blackspider wrote:On the"other" site it says the most common set up for 17" wheels are as follows:
![]()
17x7 ET35 205/40/17 or 215/40/17 front
17x8 ET35 235/40/17 or 245/35/17 back
17x7.5 ET35 215/40/17 front
17x8.5 ET35 245/35/17 back
So is ET35 the best offset for an ideal fitment on 17's?
BLZ-8027 wrote:The reason i asked if split rims have different offsets
is that i have just bought some wheels which are 16inch
two wheels are 8inch and two are 7inch
with 205 and 225 tyres
i haven't cleaned the wheels up properly yet but the only offset stamped on the inside says offset 06
not seen this before but then again never bought split rims before