I've not been on this site for the best part of a year, kinda forgetful, so thought I'd post an update on my SQ install.
The source is a PC running digital out into a Nakamichi DAC101. I then use a pair of Audiocontrol EQTs to EQ, then the signal is split to a Helix HXA1000QX to power a pair of Crystal CMP8 subs, and a Helix HXA400 MKII to power a set of Helix RS6.3 speakers passively.
The PC itself uses a small 20x4 character display and is controled by a modified stock headunit.
First up the dash, PC screen is visible in the ashtray section:
The PC buried in cables in the glovebox, could do with some shrinkage in there lol:
Shot of the PC visible with the dash controller and screen:
Some shots of the Nakamichi DAC101 in place:
The Helix RS6.3s in the front, midbass just visible by the white cone in the door, tweet and mid in the kickbuild:
One of the Crystal CMP8 subs behind the passenger seat:
One of the amps. Wiring has changed somewhat since this old photo.
MK2 MR2 SQ Install
Moderators: IMOC Moderators, IMOC Committee Members
-
- Posts: 2878
- Joined: Tue Aug 23, 2005 4:27 pm
- Location: Congleton
- Contact:
Re: MK2 MR2 SQ Install
Good Effort mate!