I've recently sent a Rev 5 spoiler away for repainting, now its back I cant seem to find all the bolts I need to put it back together
Anyone know what size bolts are needed to fit the spoiler blade
These bolts:
(I know about the strange pivot bolt, thats been removed prior and replaced, but I cant remember the size)
Also the end cap allen key bolts
Thanks guys. Derp.
Rev 5 Spoiler Bolts
Moderators: IMOC Moderators, IMOC Committee Members
-
- IMOC Moderator
- Posts: 2060
- Joined: Tue Feb 01, 2011 8:53 pm
- Location: Barnoldswick
Re: Rev 5 Spoiler Bolts
Hey my pic there of the spolier caps ha ha (well Wilki the younger when it was his)
Give me a moment I will check what the allen bolts are
Give me a moment I will check what the allen bolts are
That's a negative, Jim. I do not have the measles.
Hail Cosmos Eagle Rev 5, 1998 -
RIP White Eagle Rev 1, 1991 - 2016
-
- IMOC Moderator
- Posts: 2060
- Joined: Tue Feb 01, 2011 8:53 pm
- Location: Barnoldswick
Re: Rev 5 Spoiler Bolts
bolts for spoiler caps
M6
Only short, 5mm to 10mm
M6
Only short, 5mm to 10mm
That's a negative, Jim. I do not have the measles.
Hail Cosmos Eagle Rev 5, 1998 -
RIP White Eagle Rev 1, 1991 - 2016
Re: Rev 5 Spoiler Bolts
Thanks!
Appreciate that
Right, that's them ordered, what about the inners / blade? I think I remember the head being 8 or 10mm? Not sure about the thread or length though....
Appreciate that
Right, that's them ordered, what about the inners / blade? I think I remember the head being 8 or 10mm? Not sure about the thread or length though....
Re: Rev 5 Spoiler Bolts
The gold coloured ones are 10mm heads m8 thread there probably 15-20mm long, jobs like this are why it's worth owning a Vernier but as I'm guessing you don't get something small like a cocktail or lollipop stick put it in the hole till it bottoms out, mark it and then measure with a ruler or tape then round down to the nearest 5mm for example a 22mm deep hole would want a 20mm long bolt.
Re: Rev 5 Spoiler Bolts
wilkie senior wrote:Hey my pic there of the spolier caps ha ha
And mine for the other photo... even hotlinked from my website
Not that any of that is a problem