I am planning on replacing my cam cover gasket tomorrow [before the football ] and have read a couple of guides.
My question is does the new gasket need sealing all the way round the cam cover or not? I read the parts that are 'raised up' require some sealant where the cams meet but wasnt sure about the rest of the gasket.
Thanks
[Mk2] [Turbo] Rev3 Turbo Cam Gasket Question
Moderators: IMOC Moderators, IMOC Committee Members
Re: [Mk2] [Turbo] Rev3 Turbo Cam Gasket Question
You need to ensure the channels on the cover that it sits in a nice and clean, and that the surface on the head is perfectly clean.
You only need to put a small pea of sealant in the corners of the cam caps.
You only need to put a small pea of sealant in the corners of the cam caps.