Deleted
Moderators: IMOC Moderators, IMOC Committee Members
Re: Deleted
Nice wheels Wayne! Posting widths and offsets willl help your sale.
Should be marked on the back of the wheel.
Should be marked on the back of the wheel.
Re: Deleted
This is where my lack of knowledge exists. Few markings on the back of them other than "Japan" "Tomei" and "93" on each of them.
Got the tape measure out and all four of the alloys are 17inches.
The rears are bang on 245cm deep and the fronts are 205cm as per the tyre stamp.
What else can I measure to help people out?
Got the tape measure out and all four of the alloys are 17inches.
The rears are bang on 245cm deep and the fronts are 205cm as per the tyre stamp.
What else can I measure to help people out?
Was MR2Turbo1991, but now changed name.
5SGTE Forged Build 2011/12
Build Thread: http://www.imoc.co.uk/forums/viewtopic. ... nniversary
5SGTE Forged Build 2011/12
Build Thread: http://www.imoc.co.uk/forums/viewtopic. ... nniversary
Re: Deleted
If they have R16 tyres on them, they'll be 16" wheels.
Things to look for on the back of the wheels for example:
"+35" for offset
and "8J" for wheel width
Things to look for on the back of the wheels for example:
"+35" for offset
and "8J" for wheel width
Re: Deleted
Wish I could be more help, but genuinely no other markings on the alloy that I can see.
Was MR2Turbo1991, but now changed name.
5SGTE Forged Build 2011/12
Build Thread: http://www.imoc.co.uk/forums/viewtopic. ... nniversary
5SGTE Forged Build 2011/12
Build Thread: http://www.imoc.co.uk/forums/viewtopic. ... nniversary
-
- Posts: 2669
- Joined: Sun Jan 23, 2005 4:04 pm
- Location: Sidcup
Re: Deleted
W88NEE wrote:Wish I could be more help, but genuinely no other markings on the alloy that I can see.
Hi Wayne, hope you are EOL buddy
If you can take pics of the rear of each wheel, focus if pos on the rear of the spokes. Sometimes there are stamps in there, stating offset, make etc, tho not always lol
Hopefully someone can help you figure the specs etc
Re: Deleted
Updated a new thread with sizes now I have you tubed, googled and spoken with my friendly tyre guy.
Thanks for your help chaps.
Thanks for your help chaps.
Was MR2Turbo1991, but now changed name.
5SGTE Forged Build 2011/12
Build Thread: http://www.imoc.co.uk/forums/viewtopic. ... nniversary
5SGTE Forged Build 2011/12
Build Thread: http://www.imoc.co.uk/forums/viewtopic. ... nniversary