Recently fitted a greddy exhaust but the drivers side tip hangs lower than the passenger side.
What could be causing it???
Thanks
[Mk2] [Turbo] Dual exit exhaust is wonky??
Moderators: IMOC Moderators, IMOC Committee Members
-
- Posts: 91
- Joined: Fri Jun 27, 2014 5:28 pm
- Location: Hertfordshire
Re: [Mk2] [Turbo] Dual exit exhaust is wonky??
damage/ bent hangers.
-
- Posts: 91
- Joined: Fri Jun 27, 2014 5:28 pm
- Location: Hertfordshire
Re: [Mk2] [Turbo] Dual exit exhaust is wonky??
Okey cheers I will have a look tonight
What can I do if one of the hangers is bent? Tap the hanger with a rubber mallet and force it back into shape?
What can I do if one of the hangers is bent? Tap the hanger with a rubber mallet and force it back into shape?
Re: [Mk2] [Turbo] Dual exit exhaust is wonky??
TheCombover wrote:Okey cheers I will have a look tonight
What can I do if one of the hangers is bent? Tap the hanger with a rubber mallet and force it back into shape?
Pretty much, just do it a bit at a time and check that it's starting to line up... you can always heat it also however it could be another issue. I had a similar issue once and I put washers under a mount to lower the exhaust to the correct position
-
- Posts: 91
- Joined: Fri Jun 27, 2014 5:28 pm
- Location: Hertfordshire
Re: [Mk2] [Turbo] Dual exit exhaust is wonky??
Oh washers sounds like a good idea actually! I will give that a go this weekend