Boost problems

Discussion and technical advice the SW20 MR2. 3S-GTE, 3S-GE, 3S-FE etc
Anything and everything to do with maintenance, modifications and electrical is in here for the Mk2.

Moderators: IMOC Moderators, IMOC Committee Members

Post Reply
Ryan S
IMOC Moderator
Posts: 10902
Joined: Sat Dec 10, 2005 1:32 pm
Location: Bonnie Dundee
Contact:
Contact Ryan S

Re: Boost problems

Post by Ryan S »

Willenium wrote:If your EBC is anything like my Profec then you'll have a vacuum feed going to the controller and then some more to connect the solenoid between the turbo and actuator. Remove the solenoid plumbing from the equation by just connecting the silicone pipe from turbo straight to the actuator but leave the vacuum pipe going to the controller which means it will still read boost but not be able to alter it.


Actually yeah, mine is the same. Can be used solely as a gauge.
Top
Post Reply

Return to “MR2 MK2 1990 - 1999 NA & Turbo”