Supporting mods for 15psi

Discussion and technical advice the SW20 MR2. 3S-GTE, 3S-GE, 3S-FE etc
Anything and everything to do with maintenance, modifications and electrical is in here for the Mk2.

Moderators: IMOC Moderators, IMOC Committee Members

C35Rob
Posts: 2108
Joined: Wed Dec 04, 2013 1:14 am
Location: Gateshead

Re: Supporting mods for 15psi

Post by C35Rob »

mr299ron wrote:
Screw this forum....

Im going to leave this forum....

have fun on your high horse.


still here?
EX MR2 owner, currently on a '00 Honda CBR600 Follow me on Instagram @c35rob
Al-sw20
Posts: 1623
Joined: Sun Jan 23, 2005 6:01 am
Location: Christchurch, New Zealand
Contact:

Re: Supporting mods for 15psi

Post by Al-sw20 »

Supporting mods?

Make sure the car is up to spec in terms of cooling, fuel filter and ignition, then use the highest octane fuel you can.

The end.
tiff_lee
Posts: 384
Joined: Thu Jun 04, 2015 2:18 pm

Re: Supporting mods for 15psi

Post by tiff_lee »

bobhatton wrote:
mr299ron wrote:http://www.koracing.net/viewarticle.php?article=10

Look at the stage 1 and stage 2 requirements.

Mr2 Primer has also suggested similarly.

This is why im giving my "own" answer.

Mugs.


That is for the cars made for the USA, not the ones made in Japan that we all have in the UK

Wait, what? who's the mug?

That's your problem right there you seem to have a bit of an attitude and throw your toys out the pram like some petulant child at the slightest criticism/observation just like markstevieandmads made at the start of the thread.

I say don't leave as your threads are gold.

mr299ron wrote: If you get upset over some kid posting on your little forums and you dont like it then you should probably re-evaluate your life.

Crikey if you think this forum is little you should try posting on the Australian one!
Post Reply

Return to “MR2 MK2 1990 - 1999 NA & Turbo”