Yes- they do lots of top end, very expensive motorsport stuff.
..but they are also really happy to take on smaller, less expensive fabrication work...and are always happy to give you a brew and talk through your ideas with helpful advice and suggestions.Highly recommended if you have some custom fabrication work you want help with, or even if you just want a new radiator or intercooler or charge cooler
http://www.conceptracing.co.uk/
Some of the stuff Bob's helped weld for me.
..Turbo with wiggins clamp fitting:
Inlet manifold TB adapter plate:
Charge cooler swirl pot:
Custom hot pipe:
Cold pipe with BOV adapter:
Mounting bosses on the core:
Detail of top mounting bracket:
Coolant filler neck mod:
4 inch induction pipework:
Custom ali coolant pipework:
Charge cooler rad modifications:
Custom lower rad mounts
(a good example of Bob making a good job when I've tried to make the job as hard as possible for him):
So as you can see- they are more than happy to help out with your own work, or do it for you.
..and they're actually really reasonably priced