Whats the sensor in end of head (NA)

Discussion and technical advice the SW20 MR2. 3S-GTE, 3S-GE, 3S-FE etc
Anything and everything to do with maintenance, modifications and electrical is in here for the Mk2.

Moderators: IMOC Moderators, IMOC Committee Members

Post Reply
acf8181
Posts: 809
Joined: Tue Apr 05, 2005 12:00 am
Location: Norwich

Whats the sensor in end of head (NA)

Post by acf8181 »

Managed to drop a bleedin tool on it and snap it off!

Oil pressure or temp i'm guessing?
Top
Peter Gidden
IMOC Affiliated Trackday Organiser
Posts: 10506
Joined: Tue Jan 25, 2005 9:49 am
Location: South Yorkshire

Re: Whats the sensor in end of head (NA)

Post by Peter Gidden »

If on the end of the N/S of the head, near front corner, one wire connected to it, it's the oil pressure switch for the dash warning light.
Top
fred130111
Posts: 571
Joined: Wed Nov 06, 2013 9:10 pm

Re: Whats the sensor in end of head (NA)

Post by fred130111 »

Think this is a very weak area, managed to snap my pressure sensor off my old engine.
Top
acf8181
Posts: 809
Joined: Tue Apr 05, 2005 12:00 am
Location: Norwich

Re: Whats the sensor in end of head (NA)

Post by acf8181 »

So this one then - http://www.camskill.co.uk/m5b0s2453p119 ... 92_onwards - thankfully a cheap bit!
Top
Post Reply

Return to “MR2 MK2 1990 - 1999 NA & Turbo”