[FINALIZED] 1994 Rev 3 MR2 Turbo - Tin Top - Price Drop

MR2s for sale - all versions & variants

Moderators: IMOC Moderators, IMOC Committee Members

Marmalade
Posts: 149
Joined: Sat Jan 19, 2013 4:25 pm
Location: Newbury, Berkshire

1994 Rev 3 MR2 Turbo - Tin Top - Price Drop

Post by Marmalade »

A change of plans means I have decided to put my MR2 Turbo up for sale and I would much rather sell it as a complete car than break the parts.

I live in Newbury, West Berkshire

I am looking for £3,250, this is a third car / weekend car so I am in no rush to sell. This is a very good unmolested example, with a few choice mods, but nothing that takes it too far from standard.

1994 Revision 3, Astral Black Turbo
101,000 Miles
ARC air intake
Lots and lots of paperwork.

In my ownership - September 13 - Full service including:
All ignition components replaced from Battery to plugs
New Cambelt
New Alternator Belt
New Water pump
Carbotech XP8 pads all round
New rear disks
Momo steering wheel
R-Spec boost gauge in dash
New intercooler
New radiator
TRD Shortshift kit and gear knob

In the past year:
Cusco front and rear braces
Apexi N1 Coilovers - Front camber adjustable - - Dino wheel alignment settings when fitted
New air-con compressor and aux belts
TRD 22mm front and rear ARB's
Rogue revision 6 twin Spal fans in engine lid

Serviced and MOT'd in September 14.

And within the past few weeks brand new Toyo Proxy R1's all round and brand new full BERK exhaust including de-cat pipe

To go with the car but not fitted:
Harness belts and harness bar
Cancer bars
Race exhaust manifold
Spare battery

Bad points:
Usual drivers seat bolster wear and bonnet and drivers wing paint is now a little scratched and chipped (see pics).

Please call on 07887 692 151
Paul.
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Last edited by Marmalade on Mon Feb 16, 2015 9:04 am, edited 3 times in total.
gerbil1028
Posts: 1618
Joined: Wed Jul 25, 2007 10:15 pm
Location: NEWBURY BERKS

Re: [FINALIZED] 1994 Rev 3 MR2 Turbo - Tin Top - Price Drop

Post by gerbil1028 »

Glws never seen this about newbury thought I was only black tubby
One day the Phoenix will rise from the ashes.
Dod
Posts: 107
Joined: Tue Feb 18, 2014 6:32 pm
Location: scotland

Re: [FINALIZED] 1994 Rev 3 MR2 Turbo - Tin Top - Price Drop

Post by Dod »

Glwts buddy cracking example ..... ill take the harness bar and harnesses if they dont sell with car ..or if youd be willing to sell them on there own :thumleft:
JAAASH
IMOC Moderator
Posts: 1419
Joined: Fri Dec 24, 2010 10:06 pm
Location: Chester

Re: [FINALIZED] 1994 Rev 3 MR2 Turbo - Tin Top - Price Drop

Post by JAAASH »

Just out of interest, which harness bar is it?
_________________
"What the Deuce?!"

My MR2 - http://www.imoc.co.uk/forums/viewtopic.php?t=174494
Marmalade
Posts: 149
Joined: Sat Jan 19, 2013 4:25 pm
Location: Newbury, Berkshire

Re: [FINALIZED] 1994 Rev 3 MR2 Turbo - Tin Top - Price Drop

Post by Marmalade »

It is the one from this sale, although I see the photo's are no longer being displayed, bought them, but never fitted.

http://www.imoc.co.uk/forums/viewtopic.php?t=181662
JAAASH
IMOC Moderator
Posts: 1419
Joined: Fri Dec 24, 2010 10:06 pm
Location: Chester

Re: [FINALIZED] 1994 Rev 3 MR2 Turbo - Tin Top - Price Drop

Post by JAAASH »

Marmalade wrote:It is the one from this sale, although I see the photo's are no longer being displayed, bought them, but never fitted.

http://www.imoc.co.uk/forums/viewtopic.php?t=181662


Ok thanks. I remember that sale thread. No the harness bar I'm after.

GLWTS :thumleft:
_________________
"What the Deuce?!"

My MR2 - http://www.imoc.co.uk/forums/viewtopic.php?t=174494
Dod
Posts: 107
Joined: Tue Feb 18, 2014 6:32 pm
Location: scotland

Re: [FINALIZED] 1994 Rev 3 MR2 Turbo - Tin Top - Price Drop

Post by Dod »

Pm'd mate
Marmalade
Posts: 149
Joined: Sat Jan 19, 2013 4:25 pm
Location: Newbury, Berkshire

Re: [FINALIZED] 1994 Rev 3 MR2 Turbo - Tin Top - Price Drop

Post by Marmalade »

Replied :)
Marmalade
Posts: 149
Joined: Sat Jan 19, 2013 4:25 pm
Location: Newbury, Berkshire

Re: [FINALIZED] 1994 Rev 3 MR2 Turbo - Tin Top - Price Drop

Post by Marmalade »

In the spirit of the January sales I have dropped the price to £3,750.
gerbil1028
Posts: 1618
Joined: Wed Jul 25, 2007 10:15 pm
Location: NEWBURY BERKS

Re: [FINALIZED] 1994 Rev 3 MR2 Turbo - Tin Top - Price Drop

Post by gerbil1028 »

If you do break dibs on pads pls
One day the Phoenix will rise from the ashes.
Dod
Posts: 107
Joined: Tue Feb 18, 2014 6:32 pm
Location: scotland

Re: [FINALIZED] 1994 Rev 3 MR2 Turbo - Tin Top - Price Drop

Post by Dod »

Can i tempt you away from harness bar yet mate ? :thumleft: lol
Marmalade
Posts: 149
Joined: Sat Jan 19, 2013 4:25 pm
Location: Newbury, Berkshire

Re: [FINALIZED] 1994 Rev 3 MR2 Turbo - Tin Top - Price Drop

Post by Marmalade »

Price drop to £3,500.
slipping clutch
Posts: 1844
Joined: Sun Jan 30, 2005 1:22 pm

Re: [FINALIZED] 1994 Rev 3 MR2 Turbo - Tin Top - Price Drop

Post by slipping clutch »

Just out of interest what 'race exhaust manifold' is it that you have?
Marmalade
Posts: 149
Joined: Sat Jan 19, 2013 4:25 pm
Location: Newbury, Berkshire

Re: [FINALIZED] 1994 Rev 3 MR2 Turbo - Tin Top - Price Drop

Post by Marmalade »

Martin F
IMOC Moderator
Posts: 14822
Joined: Fri Aug 04, 2006 1:19 pm
Location: The Couch !

Re: [FINALIZED] 1994 Rev 3 MR2 Turbo - Tin Top - Price Drop

Post by Martin F »

Marmalade wrote:This is a link to the manifold:
http://www.ebay.co.uk/itm/TOYOTA-MR2-SW ... 336c047d7d


Why are you putting up a link advertising a manifold for over 1k when it is readily available for sale for a tenth of that price :?

Did you pay over £1200 for it ?
Marmalade
Posts: 149
Joined: Sat Jan 19, 2013 4:25 pm
Location: Newbury, Berkshire

Re: [FINALIZED] 1994 Rev 3 MR2 Turbo - Tin Top - Price Drop

Post by Marmalade »

I posted a link to show the manifold that I am selling with the car, the price in that Ad is irrelevant.

And no I did not pay that price for it.
BlackpoolMR2
Posts: 269
Joined: Wed Jul 31, 2013 10:10 pm

Re: [FINALIZED] 1994 Rev 3 MR2 Turbo - Tin Top - Price Drop

Post by BlackpoolMR2 »

Martin F wrote:
Marmalade wrote:This is a link to the manifold:
http://www.ebay.co.uk/itm/TOYOTA-MR2-SW ... 336c047d7d


Why are you putting up a link advertising a manifold for over 1k when it is readily available for sale for a tenth of that price :?

Did you pay over £1200 for it ?


When sellers have no stock they put the prices up high then drop when they have more. It saves money on advertising fees.
Martin F
IMOC Moderator
Posts: 14822
Joined: Fri Aug 04, 2006 1:19 pm
Location: The Couch !

Re: [FINALIZED] 1994 Rev 3 MR2 Turbo - Tin Top - Price Drop

Post by Martin F »

Marmalade wrote:I posted a link to show the manifold that I am selling with the car, the price in that Ad is irrelevant.

And no I did not pay that price for it.


I only posted as if a new member was looking for a mr2 he might be taking into consideration that the manifold was worth a bit, (as some are), when it's not...
No Harm meant :neutral:
QUOC2008
Posts: 753
Joined: Thu Apr 11, 2013 4:33 pm
Location: london

Re: [FINALIZED] 1994 Rev 3 MR2 Turbo - Tin Top - Price Drop

Post by QUOC2008 »

Get some black shoe leather polish and polish the seat bolster and it will look new again
MR2 REV 3 TURBO 450BHP
3000GT VR4 TT 500BHP
EVO X FQ360
Mr Two
Posts: 1457
Joined: Sun Mar 06, 2005 6:55 pm
Location: Stoke on Trent

Re: [FINALIZED] 1994 Rev 3 MR2 Turbo - Tin Top - Price Drop

Post by Mr Two »

Pm'd
Locked

Return to “MR2s for Sale”