Hi guys
Looking to do a full ignition service to hopefully solve my cold running problems,
The ht leads fitted at the moment are likely the originals and look rather tired and am looking for reccomendations for replacenents, i dont want magnecor as my last rev5 didn't run well on them at all, so for a uk car with 100,000 + miles what do you lot suggest
I liked the trd leads i used on my old car but they dont fit in the plastic channel and ideally id like to keep it all tidy under there,
Thanks in advance
Also if possible whats the best plugs
NGK OR DENSO ?
IGNITION LEADS RECCOMENDATION UK REV5 N/A PLEASE
Moderators: IMOC Moderators, IMOC Committee Members
Re: IGNITION LEADS RECCOMENDATION UK REV5 N/A PLEASE
TBH nothing wrong with OEM Alan.
They are top quality and go on forever, I know a Toyota dealership that will offer us guys good discount and post out if you are thinking of this.
They are top quality and go on forever, I know a Toyota dealership that will offer us guys good discount and post out if you are thinking of this.
3VZ-FE V6 TRD Widebody Replica
Draven wrote "TRD dude. TRD... Can see awesomness from anywhere. "
http://www.imoc.co.uk/forums/viewtopic. ... sc&start=0
Draven wrote "TRD dude. TRD... Can see awesomness from anywhere. "
http://www.imoc.co.uk/forums/viewtopic. ... sc&start=0
Re: IGNITION LEADS RECCOMENDATION UK REV5 N/A PLEASE
Torero wrote:TBH nothing wrong with OEM Alan.
They are top quality and go on forever
Re: IGNITION LEADS RECCOMENDATION UK REV5 N/A PLEASE
Torero wrote:TBH nothing wrong with OEM Alan.
They are top quality and go on forever, I know a Toyota dealership that will offer us guys good discount and post out if you are thinking of this.
Oooh how much? Haven't changed my leads yet
Re: IGNITION LEADS RECCOMENDATION UK REV5 N/A PLEASE
mr2-ben reccomended the trd leads over stock which were slightly cheaper
do you think i would be better off with oem ?
do you think i would be better off with oem ?
Re: IGNITION LEADS RECCOMENDATION UK REV5 N/A PLEASE
Always go with OEM on HT leads
Re: IGNITION LEADS RECCOMENDATION UK REV5 N/A PLEASE
were can i get them from tomorrow and whats cost on the ?
Re: IGNITION LEADS RECCOMENDATION UK REV5 N/A PLEASE
They cost around £120.
Your local friendly Toyota dealership typically takes around 2 working days to get them.
But of course it's New Year now
Your local friendly Toyota dealership typically takes around 2 working days to get them.
But of course it's New Year now
Re: IGNITION LEADS RECCOMENDATION UK REV5 N/A PLEASE
ngk do good leads, very good
magnecor are beyond xxxx
magnecor are beyond xxxx
Re: IGNITION LEADS RECCOMENDATION UK REV5 N/A PLEASE
I have NGK on my turbo. Spot on. 2 Le Mans trips with them now.
Re: IGNITION LEADS RECCOMENDATION UK REV5 N/A PLEASE
RedMR² wrote:I have NGK on my turbo. Spot on. 2 Le Mans trips with them now.
Thats all i needed to hear
Will the ngk's fit in the plastic trunking on the inlet ? As the trd's dont ?
What sort of price should i be paying for ngk leads for a n/a and would i bebest using ngk platinum bkr6ep-8 plugs over denso 1's if using ngk leads ?
Re: IGNITION LEADS RECCOMENDATION UK REV5 N/A PLEASE
alan_uk wrote:RedMR² wrote:I have NGK on my turbo. Spot on. 2 Le Mans trips with them now.
Thats all i needed to hear
Will the ngk's fit in the plastic trunking on the inlet ? As the trd's dont ?
Not sure mate, I had to do away with the plastic trunking due to it not fitting with my top mount charge cooler. Got my NGK leads from GTSchris.
Re: IGNITION LEADS RECCOMENDATION UK REV5 N/A PLEASE
Ok mate no probs cheers
Does gts chris do the same 1's for n/a ?
Does gts chris do the same 1's for n/a ?
Re: IGNITION LEADS RECCOMENDATION UK REV5 N/A PLEASE
OEM is fine.
My last MR2 had Magnecor leads. They were red. They were on the car for who knows how long before I got it, they were still on the car 4 years / 60k miles later.
To be honest, as long as the are the right spec and aren't dodgy eBay specials you'll probably be fine!
My last MR2 had Magnecor leads. They were red. They were on the car for who knows how long before I got it, they were still on the car 4 years / 60k miles later.
To be honest, as long as the are the right spec and aren't dodgy eBay specials you'll probably be fine!
Re: IGNITION LEADS RECCOMENDATION UK REV5 N/A PLEASE
Leads are same for Turbos & NA's. 5mm leads for Rev2+. I have NGK ones which work well. They do not fit the plastic trunking as shorter than stock.
Re: IGNITION LEADS RECCOMENDATION UK REV5 N/A PLEASE
RedMR² wrote:alan_uk wrote:RedMR² wrote:I have NGK on my turbo. Spot on. 2 Le Mans trips with them now.
Thats all i needed to hear
Will the ngk's fit in the plastic trunking on the inlet ? As the trd's dont ?
Not sure mate, I had to do away with the plastic trunking due to it not fitting with my top mount charge cooler. Got my NGK leads from GTSchris.
i messaged gts chris and he said he cant help with any of them parts sorry lol
shame really as he is local too
Re: IGNITION LEADS RECCOMENDATION UK REV5 N/A PLEASE
alan_uk wrote:RedMR² wrote:alan_uk wrote:
Thats all i needed to hear
Will the ngk's fit in the plastic trunking on the inlet ? As the trd's dont ?
Not sure mate, I had to do away with the plastic trunking due to it not fitting with my top mount charge cooler. Got my NGK leads from GTSchris.
i messaged gts chris and he said he cant help with any of them parts sorry lol
shame really as he is local too
I ordered NGK leads from GTSchris a couple of hours ago :S
Re: IGNITION LEADS RECCOMENDATION UK REV5 N/A PLEASE
lovely guess he dont like me then lol or dont want my buisness :O
Re: IGNITION LEADS RECCOMENDATION UK REV5 N/A PLEASE
what mm leads do i need and do turbo 1's 100% fit n/a
Re: IGNITION LEADS RECCOMENDATION UK REV5 N/A PLEASE
Didn't even realise they were turbo leads D: Plug end should be the same and it has the same clip fitting on the Dizzy side so fingers crossed