NA uprated clutch

Discussion and technical advice the SW20 MR2. 3S-GTE, 3S-GE, 3S-FE etc
Anything and everything to do with maintenance, modifications and electrical is in here for the Mk2.

Moderators: IMOC Moderators, IMOC Committee Members

Post Reply
pistol pete
Posts: 7068
Joined: Mon Feb 11, 2008 5:47 pm

NA uprated clutch

Post by pistol pete »

I am in search of a good clutch for my track mk2..
few power mods.. but most importantly Track tyres along with LSD box and a LOT of launches..

so what recomendations for a na clutch can take lots of launches ( as its in the sprint series) with track tyres.. no road use at all only track use.
I have tun a LUK clutch this year and its coped fine witht he launches.. but its the addition of track tyres i have been told will kill the clutch
cheers
Race Idiot
Posts: 2589
Joined: Wed Jan 25, 2006 10:48 pm
Location: Hertfordshire

Re: NA uprated clutch

Post by Race Idiot »

Like I said, I recon helix would be your best bet

http://www.fensport.co.uk/Parts/Model_26/Category_3/736

Does say is more suitable for competition use and drag type launches.
thomp1983
Posts: 1545
Joined: Sat Oct 01, 2011 1:30 pm
Location: newark, notts

Re: NA uprated clutch

Post by thomp1983 »

Does the 3sgte crank have the same pcd as the 3sge? If so you should be able to use a turbo flywheel and pressure plate with n/a friction disc.

That's the setup used on v6 swaps we just redrill the flywheel pcd to suit the v6 engine. It copes with the extra torque and hard launches fine
gavsdavs
Posts: 702
Joined: Thu Nov 15, 2012 2:31 pm
Location: saahfeeeeastlaandun

Re: NA uprated clutch

Post by gavsdavs »

Super grabby, uber clamping, ACT.
Normal feel, better clamping than stock, Helix.
For a track going vehicle the ACT is a no nonsense answer.
pistol pete
Posts: 7068
Joined: Mon Feb 11, 2008 5:47 pm

Re: NA uprated clutch

Post by pistol pete »

Act??
pistol pete
Posts: 7068
Joined: Mon Feb 11, 2008 5:47 pm

Re: NA uprated clutch

Post by pistol pete »

Cheers breltt nit seen that one before
I'll drop Adrian a message about that one
Cheers
GreddyMR2
Posts: 950
Joined: Thu Nov 10, 2011 6:35 pm
Location: Lithuania
Contact:

Re: NA uprated clutch

Post by GreddyMR2 »

I am using Helix ceramic, can vote for that! Just not for a daily car unless you want to spin your wheels all the time you start going :)
Post Reply

Return to “MR2 MK2 1990 - 1999 NA & Turbo”