Discussion and technical advice the SW20 MR2. 3S-GTE, 3S-GE, 3S-FE etc
Anything and everything to do with maintenance, modifications and electrical is in here for the Mk2.
Noticed today the direction of the offset on my top mounts is not the same. Must have been this way when I got it.
The arrow that should point to the rear on the rubber part is facing forwards on the near side.
What is the easiest way to turn it 180 degrees?
Assuming it is the top mount and not the top spring cup then you just need to loosen and remove the top mount nuts, pull the strut down far enough so you can rotate the top mount into correct position then refit nuts.
If it turns out to be the spring cup you need to remove the strut and reassemble it