I have a spare Kei office replica wing thats up for sale.
im including a lightened oem trunk lid.
I can take pictures of the stuff done to it on request.
The color on these parts are toyotas Strong blue metallic (8B6).
£250 shipped.
/Jimmy
[FINALIZED] Kei office replica wing incl lightened trunk lid
Moderators: IMOC Moderators, IMOC Committee Members
Re: [FINALIZED] Kei office replica wing incl lightened trunk lid
how much for bumper and or diffuser if they are at all for sale, mainly diffuser though
Re: [FINALIZED] Kei office replica wing incl lightened trunk lid
sorry, not for sale!
trunk and wing only
trunk and wing only
Re: [FINALIZED] Kei office replica wing incl lightened trunk lid
damn very nice diffuser . would you like up more photo
Re: [FINALIZED] Kei office replica wing incl lightened trunk lid
Have a look here:
http://www.mr2oc.com/showthread.php?t=427538
I also have a picture with measurement in case anyone wants it.
All carbon parts for it can be found at:
www.easycomposites.co.uk
And these are the parts (not very expensive at all, just a bit of work to piece it together):
1 squaremeter Wet Lay Carbon Fibre Sheet, 2mm thick.
1 pcs Pre-Preg Carbon Fibre Angle, 2mm thick, 15mm profile.
3pcs Pre-Preg Carbon Fibre Angle, 2mm thick, 25mm profile.
The main board is 900mm wide and 72 mm long.
the fins are 100mm at the rear and 20mm at the front, and the length is 450mm. The 25mm profiles that holds the fins are 400mm long.
One 25mm profile is attached on the top of the diffuser from side to side to make it stiff in the middle. i will point out where i attached it on the picture i include.
also i used 4 m6 bolt at the front, 2 long (around 180mm long) m6 rods in the middle on the sides and then 6 m6 bolts (130mm long) at the rear, attached to the inner black bumper. Picture will show where the holes are.
Now as im beeing nice.. be nice to me and buy my stuff i have for sale
Regards
Jimmy
http://www.mr2oc.com/showthread.php?t=427538
I also have a picture with measurement in case anyone wants it.
All carbon parts for it can be found at:
www.easycomposites.co.uk
And these are the parts (not very expensive at all, just a bit of work to piece it together):
1 squaremeter Wet Lay Carbon Fibre Sheet, 2mm thick.
1 pcs Pre-Preg Carbon Fibre Angle, 2mm thick, 15mm profile.
3pcs Pre-Preg Carbon Fibre Angle, 2mm thick, 25mm profile.
The main board is 900mm wide and 72 mm long.
the fins are 100mm at the rear and 20mm at the front, and the length is 450mm. The 25mm profiles that holds the fins are 400mm long.
One 25mm profile is attached on the top of the diffuser from side to side to make it stiff in the middle. i will point out where i attached it on the picture i include.
also i used 4 m6 bolt at the front, 2 long (around 180mm long) m6 rods in the middle on the sides and then 6 m6 bolts (130mm long) at the rear, attached to the inner black bumper. Picture will show where the holes are.
Now as im beeing nice.. be nice to me and buy my stuff i have for sale
Regards
Jimmy
Re: [FINALIZED] Kei office replica wing incl lightened trunk lid
l1ca mentioned in another thread that he "needed this spoiler in his life". Don't ask me why my brain retains this useless (to me) information but it's worth pinging him a PM.
Re: [FINALIZED] Kei office replica wing incl lightened trunk lid
lol ive seen something like that as well but on mr2oc.com ..unfortunately i will not bother to send this overseas.. just to much shipping cost i think.
ill throw him a pm and see what he says, thanks!
ill throw him a pm and see what he says, thanks!
Re: [FINALIZED] Kei office replica wing incl lightened trunk lid
NoddE wrote:Have a look here:
http://www.mr2oc.com/showthread.php?t=427538
I also have a picture with measurement in case anyone wants it.
All carbon parts for it can be found at:
www.easycomposites.co.uk
And these are the parts (not very expensive at all, just a bit of work to piece it together):
1 squaremeter Wet Lay Carbon Fibre Sheet, 2mm thick.
1 pcs Pre-Preg Carbon Fibre Angle, 2mm thick, 15mm profile.
3pcs Pre-Preg Carbon Fibre Angle, 2mm thick, 25mm profile.
The main board is 900mm wide and 72 mm long.
the fins are 100mm at the rear and 20mm at the front, and the length is 450mm. The 25mm profiles that holds the fins are 400mm long.
One 25mm profile is attached on the top of the diffuser from side to side to make it stiff in the middle. i will point out where i attached it on the picture i include.
also i used 4 m6 bolt at the front, 2 long (around 180mm long) m6 rods in the middle on the sides and then 6 m6 bolts (130mm long) at the rear, attached to the inner black bumper. Picture will show where the holes are.
Now as im beeing nice.. be nice to me and buy my stuff i have for sale
Regards
Jimmy
Thanks a lots mate
Re: [FINALIZED] Kei office replica wing incl lightened trunk lid
l1ca mentioned in another thread that he "needed this spoiler in his life"
I never said such a thing! Its cool im living in your head rent free though.
I think I said it about the madpsi carbon duckbill boot lid...
Re: [FINALIZED] Kei office replica wing incl lightened trunk lid
l1ca wrote:l1ca mentioned in another thread that he "needed this spoiler in his life"
I never said such a thing! Its cool im living in your head rent free though.
I think I said it about the madpsi carbon duckbill boot lid...
I beg to differ:
Re: [FINALIZED] Kei office replica wing incl lightened trunk lid
Any chance of the pic with measurement ?
Lol.
You can PM me.
Lol.
You can PM me.
Re: [FINALIZED] Kei office replica wing incl lightened trunk lid
So I did! touche' sir, touche' lol!
How do people remember things like this!
How do people remember things like this!
Re: [FINALIZED] Kei office replica wing incl lightened trunk lid
l1ca wrote:So I did! touche' sir, touche' lol!
How do people remember things like this!
I know right cus clearly you don't
Re: [FINALIZED] Kei office replica wing incl lightened trunk lid
Hmmm..
Would you swap for a Bomex drift wing?
Would you swap for a Bomex drift wing?
Re: [FINALIZED] Kei office replica wing incl lightened trunk lid
Just wanted to post and say that I have recieved my mirrors this morning. Absolutely brilliant! Packaged to perfection. No chance they were getting damaged!
Thank you again mate
George
Thank you again mate
George
Re: [FINALIZED] Kei office replica wing incl lightened trunk lid
sorry i forgot the diffuser pic with measurments:
Re: [FINALIZED] Kei office replica wing incl lightened trunk lid
and lowered price on the wing and trunk..
Last edited by NoddE on Wed Jun 04, 2014 7:27 am, edited 1 time in total.
Re: [FINALIZED] Kei office replica wing incl lightened trunk lid
Hi there,
if you ship to France ... offer at 220 £ shipped ?
if you ship to France ... offer at 220 £ shipped ?
Re: [FINALIZED] Kei office replica wing incl lightened trunk lid
Hi, sorry it has already been sold. One week ago actually. I will end this thread now.
-
- Posts: 6071
- Joined: Wed Dec 15, 2004 10:16 am
Re: [FINALIZED] Kei office replica wing incl lightened trunk lid
This Sale has been completed. The Buyer was Craig_'2