About to be removed from car.
Turbo 15 months old. Genuine Garrett ball bearing turbo. Cost £1050 from Owen Developments.
Kit includes:
Turbo
Adaptor block
Actuator
Downpipe
Compressor air intake hose
MBC set to 16psi
Goodridge oil inlet hose with restrictor
Goodridge braided water hoses
Oil drain hose
Currently fitted to Rev3 Turbo we are about to break.
£750.00 plus shipping. Will ship worldwide.
£990.00 supplied and fitted in our workshop.
GT28 Full Kit
Moderators: IMOC Moderators, IMOC Committee Members
-
- IMOC Affiliated Trackday Organiser
- Posts: 10506
- Joined: Tue Jan 25, 2005 9:49 am
- Location: South Yorkshire
GT28 Full Kit
Last edited by Peter Gidden on Sun Jan 12, 2014 2:00 pm, edited 1 time in total.
Re: GT28 Full Kit
Hi Peter what bhp are these rated to please ?
My TRD WIDEBODY build thread http://www.imoc.co.uk/forums/viewtopic.php?t=164957
Re: GT28 Full Kit
Hi.
Do you have the full part number for the turbo please
Do you have the full part number for the turbo please
Re: GT28 Full Kit
I take it this is long gone ?
-
- IMOC Affiliated Trackday Organiser
- Posts: 10506
- Joined: Tue Jan 25, 2005 9:49 am
- Location: South Yorkshire
Re: GT28 Full Kit
afennell wrote:I take it this is long gone ?
Actually, it's still available. The owner of the car was away for about 6 weeks and didn't leave me the keys!
I now have them so the car will be adverised for breaking.
Re: GT28 Full Kit
hi mate,
what kind of intercoolersetup did the car got? charge? any pics?
cheers
what kind of intercoolersetup did the car got? charge? any pics?
cheers
Re: GT28 Full Kit
Internal or external wastegate?
-
- IMOC Affiliated Trackday Organiser
- Posts: 10506
- Joined: Tue Jan 25, 2005 9:49 am
- Location: South Yorkshire
Re: GT28 Full Kit
puku wrote:what kind of intercoolersetup did the car got?
Car had aftermarket SMC, which has been sold.
afennell wrote:Internal or external wastegate?
Internally gated.
-
- IMOC Affiliated Trackday Organiser
- Posts: 10506
- Joined: Tue Jan 25, 2005 9:49 am
- Location: South Yorkshire
Re: GT28 Full Kit
Pics:
- Scott Barton
- IMOC Committee
- Posts: 11170
- Joined: Sun Mar 13, 2005 10:14 pm
- Location: Wateringbury, Kent
Re: GT28 Full Kit
I have the GT28RS on my car and can vouch for this as being a quality bit of kit. Low lag, and maintains good boost.
Mine would benefit from an external wastegate, but that is for another day!
Dyno read out without the Nitrous running.
Mine would benefit from an external wastegate, but that is for another day!
Dyno read out without the Nitrous running.
IMOC - winners of JAE best overall club stand 2010, 2013, 2014 & 2017!
1994 GT-S T-Bar 397bhp with NOS *sold*
2016 Porsche Cayman 981GTS 347bhp Flat Six
1994 GT-S T-Bar 397bhp with NOS *sold*
2016 Porsche Cayman 981GTS 347bhp Flat Six
-
- Posts: 77
- Joined: Wed May 22, 2013 6:45 pm
- Location: North Italy
- Contact:
Re: GT28 Full Kit
PM'd
-
- Posts: 1618
- Joined: Wed Jul 25, 2007 10:15 pm
- Location: NEWBURY BERKS
Re: GT28 Full Kit
MR2 Rich wrote:I take it this is long gone?
Hi rich if i am right this is still available as attached to the engine I have just purchased from Peter
engines still in the car with the car blocked in at the moment so should be available
One day the Phoenix will rise from the ashes.
-
- Posts: 1618
- Joined: Wed Jul 25, 2007 10:15 pm
- Location: NEWBURY BERKS
Re: GT28 Full Kit
If wrong sorry and Peter will correct me
One day the Phoenix will rise from the ashes.
-
- IMOC Affiliated Trackday Organiser
- Posts: 10506
- Joined: Tue Jan 25, 2005 9:49 am
- Location: South Yorkshire
Re: GT28 Full Kit
gerbil1028 wrote:If wrong sorry and Peter will correct me
You're bang on! You been creeping round my compound at night?
The GT28 kit is supposedly sold to Josh (simba90). Removing tomorrow, to be fitted this weekend. However, he hasn't actually paid any deposit.
I will confirm with Josh and report back. This kit is in perfect condition. Checked my old invoices with speedo reading. It has done less than 600 miles since being fitted.
Re: GT28 Full Kit
I wait to hear back.
What supporting mods would this need on a standard Rev3?
Cheers Rich
No 2
-
- IMOC Affiliated Trackday Organiser
- Posts: 10506
- Joined: Tue Jan 25, 2005 9:49 am
- Location: South Yorkshire
Re: GT28 Full Kit
MR2 Rich wrote:What supporting mods would this need on a standard Rev3?
Previous owner was running stock Rev3, with ebay SMIC and MBC set to 16.5psi.
Re: GT28 Full Kit
Peter Gidden - SBITS wrote:MR2 Rich wrote:What supporting mods would this need on a standard Rev3?
Previous owner was running stock Rev3, with ebay SMIC and MBC set to 16.5psi.
Interesting.
Would you recommend any other mods Peter?
No 2
Re: GT28 Full Kit
Peter Gidden - SBITS wrote:I will confirm with Josh and report back.
Ye, I'm definitely buying this, sorry Rich
Re: GT28 Full Kit
Is it sold already?