reasonable condition, they are pearlescent white (kinda purple tinge in the sun) they have falken 452s on the rear, and kumhos solis on the front. if you are hugely fussy they could do with a refurb but not the worst condition i've ever seen.
i was going to refurb these and keep them on as i love them, they are the best looking wheels on the mr2 in my opinion, however, i'm going to be upgrading to 300zx calipers and they simple don't fit. so, selling these on to buy a bigger set.
these wheels have no buckles and are perfectly balanced, i've had the car up to 150+mph (on private road) and there is no wobbles at ANY speed whatsoever.
priced to sell at £350 with tyres. front tyres have plenty life in them, the rear are borderline.
oh, just to add to this, all centre caps are in great condition and on the wheels they have the "racing" printed on them, apparently these are really rare now.
[FINALIZED] Staggered 16" Enkie RP01s for sale, 7" front, 8" rear.
Moderators: IMOC Moderators, IMOC Committee Members
-
- IMOC Moderator
- Posts: 10902
- Joined: Sat Dec 10, 2005 1:32 pm
- Location: Bonnie Dundee
- Contact:
Staggered 16" Enkie RP01s for sale, 7" front, 8" rear.
Last edited by Ryan S on Sun Dec 29, 2013 2:42 pm, edited 8 times in total.
Re: [FINALIZED] Staggered 16" Enkie RP01s for sale, 7" front, 8" rear.
If you would of posted these up yesterday, I would of bitten your hand off. Spent my money on other non needed car parts Long shot, but if they are here end of January, I'd seriously be interested.
-
- IMOC Moderator
- Posts: 10902
- Joined: Sat Dec 10, 2005 1:32 pm
- Location: Bonnie Dundee
- Contact:
Re: [FINALIZED] Staggered 16" Enkie RP01s for sale, 7" front, 8" rear.
Donato wrote:If you would of posted these up yesterday, I would of bitten your hand off. Spent my money on other non needed car parts Long shot, but if they are here end of January, I'd seriously be interested.
They probably will be mate, nothing seems to sell lately! I'll get proper pics tomorrow as the photos make them appear as if they are perfect and they aren't.
Re: [FINALIZED] Staggered 16" Enkie RP01s for sale, 7" front, 8" rear.
I sold mine on Ebay for £400 a month ago. Just an FYI.
SW20 Rev1 Supercharged 2GR-FE Powered Trackday Car.
-
- IMOC Moderator
- Posts: 10902
- Joined: Sat Dec 10, 2005 1:32 pm
- Location: Bonnie Dundee
- Contact:
Re: [FINALIZED] Staggered 16" Enkie RP01s for sale, 7" front, 8" rear.
monkeyra wrote:I sold mine on Ebay for £400 a month ago. Just an FYI.
cheers for that mate, what condition were yours in?? did you have the super rare centre caps?? also, did they have tyres?? i'm only after £350 but i am firm on that.
-
- IMOC Moderator
- Posts: 10902
- Joined: Sat Dec 10, 2005 1:32 pm
- Location: Bonnie Dundee
- Contact:
Re: [FINALIZED] Staggered 16" Enkie RP01s for sale, 7" front, 8" rear.
trying to keep these on the top as i want as quick a sale as possible
EDIT: i'll deffo get some decent photos of each wheel today
EDIT: i'll deffo get some decent photos of each wheel today
Re: [FINALIZED] Staggered 16" Enkie RP01s for sale, 7" front, 8" rear.
Mine were in good nick, only one wheel had rim scuffing, three of the wheels had the centre caps, and the tyres were probably not even half worn.
SW20 Rev1 Supercharged 2GR-FE Powered Trackday Car.
-
- IMOC Moderator
- Posts: 10902
- Joined: Sat Dec 10, 2005 1:32 pm
- Location: Bonnie Dundee
- Contact:
Re: [FINALIZED] Staggered 16" Enkie RP01s for sale, 7" front, 8" rear.
monkeyra wrote:Mine were in good nick, only one wheel had rim scuffing, three of the wheels had the centre caps, and the tyres were probably not even half worn.
ah ok, mine are in fair condition, the photos make them looks worse than they are if anything, it think £350 is a reasonable price, i'll chuck them on ebay if they don't sell in a few days, thanks for the info matey
-
- IMOC Moderator
- Posts: 10902
- Joined: Sat Dec 10, 2005 1:32 pm
- Location: Bonnie Dundee
- Contact:
Re: [FINALIZED] Staggered 16" Enkie RP01s for sale, 7" front, 8" rear.
bump. going on ebay at the end of the week
Re: [FINALIZED] Staggered 16" Enkie RP01s for sale, 7" front, 8" rear.
Hi Mate, what are the exact sizes of the wheels,offsets, widths etc?
Also what size tyres do you put on them?
Cheers, michael.
Also what size tyres do you put on them?
Cheers, michael.
Http://www.planet-wax.com, Mobile Car Valet & Car Detailing based in Glasgow.
-
- IMOC Moderator
- Posts: 10902
- Joined: Sat Dec 10, 2005 1:32 pm
- Location: Bonnie Dundee
- Contact:
Re: [FINALIZED] Staggered 16" Enkie RP01s for sale, 7" front, 8" rear.
msherry21 wrote:Hi Mate, what are the exact sizes of the wheels,offsets, widths etc?
Also what size tyres do you put on them?
Cheers, michael.
i'm not 100% on the widths or offsets mate, i can only assume they are the correct offset for an mr2 as they sit great on mine without the need for spacers, the tyre size on the front is 205/45 and 225/45 on the rear. i'll have the wheels off in a couple of days so i'll be able to tell you the exact size.
Re: [FINALIZED] Staggered 16" Enkie RP01s for sale, 7" front, 8" rear.
Let me know as soon as you do mate, really interested in these!
Http://www.planet-wax.com, Mobile Car Valet & Car Detailing based in Glasgow.
-
- IMOC Moderator
- Posts: 10902
- Joined: Sat Dec 10, 2005 1:32 pm
- Location: Bonnie Dundee
- Contact:
Re: [FINALIZED] Staggered 16" Enkie RP01s for sale, 7" front, 8" rear.
msherry21 wrote:Let me know as soon as you do mate, really interested in these!
cool mate.
Re: [FINALIZED] Staggered 16" Enkie RP01s for sale, 7" front, 8" rear.
Might be useful to know if they are staggered too.
-
- IMOC Moderator
- Posts: 10902
- Joined: Sat Dec 10, 2005 1:32 pm
- Location: Bonnie Dundee
- Contact:
Re: [FINALIZED] Staggered 16" Enkie RP01s for sale, 7" front, 8" rear.
Johnr32 wrote:Might be useful to know if they are staggered too.
yeah, my shitty winter wheels are going on anyway so i'll get them off, i have a feeling the wheels aren't staggered, just the tyres.
-
- IMOC Moderator
- Posts: 10902
- Joined: Sat Dec 10, 2005 1:32 pm
- Location: Bonnie Dundee
- Contact:
Re: [FINALIZED] Staggered 16" Enkie RP01s for sale, 7" front, 8" rear.
right, i stuck a ruler through the wheels, 8" on the front and 9" on the back, i'm assuming the offset is ET45 and not 35 as stated ( i had in my head that 35 was standard mr2 offset).
just to add to this, the wheels can be collected by courier from my work, there's somebody here 7 days a week 9am (could make 7:30am if needed) until 8pm at night
EDIT: sorry folks, i think the fronts are actually 8" hard to measure properly with the wheels in situ
just to add to this, the wheels can be collected by courier from my work, there's somebody here 7 days a week 9am (could make 7:30am if needed) until 8pm at night
EDIT: sorry folks, i think the fronts are actually 8" hard to measure properly with the wheels in situ
-
- IMOC Moderator
- Posts: 10902
- Joined: Sat Dec 10, 2005 1:32 pm
- Location: Bonnie Dundee
- Contact:
Re: [FINALIZED] Staggered 16" Enkie RP01s for sale, 7" front, 8" rear.
quick bump before I list them on ebay later on today
-
- Posts: 530
- Joined: Mon Apr 25, 2011 4:39 pm
- Location: Cheshire
Re: [FINALIZED] Staggered 16" Enkie RP01s for sale, 7" front, 8" rear.
If you're getting measurements of 8 and 9 inches across the outer rim edges then the wheels are probably 7 and 8 inches in width. The width is measured between the surfaces that the tyre contacts (my 7/8in wheels measure 8/9in across the outer edges). Hope that helps
GLWTS
GLWTS
-
- IMOC Moderator
- Posts: 10902
- Joined: Sat Dec 10, 2005 1:32 pm
- Location: Bonnie Dundee
- Contact:
Re: [FINALIZED] Staggered 16" Enkie RP01s for sale, 7" front, 8" rear.
Big_Martin wrote:If you're getting measurements of 8 and 9 inches across the outer rim edges then the wheels are probably 7 and 8 inches in width. The width is measured between the surfaces that the tyre contacts (my 7/8in wheels measure 8/9in across the outer edges). Hope that helps
GLWTS
ah ok, in that case you're right mate, the measurements i took were literally from the outer edge of each wheel, i thought they were measured that way, i did think 9 inch was a bit wide for a 16" wheel
-
- IMOC Moderator
- Posts: 10902
- Joined: Sat Dec 10, 2005 1:32 pm
- Location: Bonnie Dundee
- Contact:
Re: [FINALIZED] Staggered 16" Enkie RP01s for sale, 7" front, 8" rear.
right, last wee bump before i chuck these on ebay, never had a chance but i'm off work tomorrow, so they will be listed, most likely on a 3 day auction