Rear brakes squeaking when reversing

Discussion and technical advice for 84-89 AW10 & AW11 MR2. 3A-LU, 4A-GE, 4A-GZE.

Moderators: IMOC Moderators, IMOC Committee Members

Post Reply
Tiger Magnet
Posts: 30
Joined: Mon Mar 28, 2011 9:27 pm
Location: Haywards Heath

Rear brakes squeaking when reversing

Post by Tiger Magnet »

hiya. i have an F Reg mk1b and park the car on a level driveway overnight. in the morning when i release the handbrake and start reversing the rear brakes squeak. when i pull away forwards the squeaking stops. the car was serviced a few months ago and still lots of life in the discs and pads. any ideas what the problem could be and what needs doing?? thanks in advance
aw11rally
Posts: 763
Joined: Wed Dec 31, 2008 12:46 am

Re: Rear brakes squeaking when reversing

Post by aw11rally »

Mk1 rears (and most rear calipers with a hand break mech, even on much younger cars) have a habit of seazing solid.

Strip down the calipers and give them a good clean and bashing around. Some kind of high temperature grease on moving parts may also help.
Tiger Magnet
Posts: 30
Joined: Mon Mar 28, 2011 9:27 pm
Location: Haywards Heath

Re: Rear brakes squeaking when reversing

Post by Tiger Magnet »

many thanks for your help. do you think i can do it myself or should i get a proffesional to do it as not 100% sure how to remove and rebuild calipers. thanks again
scomr2
Posts: 152
Joined: Sat Jun 11, 2005 3:30 pm
Location: northampton

Re: Rear brakes squeaking when reversing

Post by scomr2 »

Or just leave it parked in gear with the handbrake off.
aw11rally
Posts: 763
Joined: Wed Dec 31, 2008 12:46 am

Re: Rear brakes squeaking when reversing

Post by aw11rally »

If the rears have been sticking it will need new pads. Not a big job at all. Unsticking them will be the challenge.

If you're skilled enough to change pads you should easily be able to fix this.

Also check the hand brake cables, they can also cause issues.
Post Reply

Return to “MR2 MK1 1984-1989 NA & SC”