[FINALIZED] Selling up and breaking 4agze- tuning and standard parts

Parts for all types of Mk1 MR2 only

Moderators: IMOC Moderators, IMOC Committee Members

cartledge_uk
Posts: 7608
Joined: Sun Nov 13, 2005 6:28 pm
Location: Newbury

Selling up and breaking 4agze- tuning and standard parts

Post by cartledge_uk »

No dibs unless I explicitly state, cash talks! :wink:

I will uodate with photos as I visit the car and take bits off, if you want a photo of something specific, ask. photos may appear rubbish due to camera phone, they will be updated at a later date when I can get my camera on them

The car is 80miles away so have some patience, lol



Everything is going, just its time has come I'm losing a garage, something has to go and after 6years in the making it doesnt have the same purpose anymore and I dont get to se it as much as its 80miles away from me, although it always puts a big smile on my face while driving
Offers invited on all parts :+:
Please ask as I have loads of part I haven't listed


I will update as I remember parts



Image

Koni adjustable 1b suspension struts built in struts done 300miles £370

Pi springs well used (been on my last car) £50

Toda uprated topmounts £150
Image

Brand new toyota drivers wing, painted in dulux - will come straight off ~300miles on it only little bit dirty - £100
Image

Image


Brand new toyota passenger wing, painted in dulux - will come straight off ~300miles on it only - £100

Magnex exhaust, like new, just a bit dirty ~300miles £250
Image

Image


4age Exedy 212mm paddle clutch and cover ~200miles £220

4age Exedy 200mm paddle clutch and cover loads of life left £220
Image

Toda lightweight 4age 200mm flywheel £220
Image

ARP flywheel bolts £20

Carbotech rear brake pads barely used £80

Magnecor KV8 leads for wasted spark ~300miles use £50
Image


Braided brake lines £40

Alloy techno toy tuning 175mm crank pulley new unused £90
Image

SC14 supercharger with a 115/110mm (cant remember which) clutch with outlet pipes £350
Image

SC14 supercharger with 120mm (late spec 4agze clutch) machined to fit £350
Image


Image

Image

Wiring loom, ecu, all sensors (including new knock sensor £130 on its own), Igniter/dizzy thing just rebuilt with new seals £250

C52 N/a gearbox, rebuilt and seviced with a TODA helical LSD, only ever used with redline £500
Image
Image
Image



Charge cooler kit, pump, swirl pot, cinq rad loads of hose, xs power chargecooler - £250

Mk1a rear suspension triangles great condition £200 - you cannot get these anymore



alloy adjustable rear tie rods (2srus ones) 300miles use but have been standing £80

Image

Remember postage is extra, ontop of the price

more parts added :wink:
Last edited by cartledge_uk on Sun Jun 29, 2014 6:38 pm, edited 7 times in total.
pk_090
Posts: 1968
Joined: Fri Jun 03, 2011 9:39 pm
Location: Stoke on trent, staffordshire

Re: [FINALIZED] Selling up and breaking 4agze- tuning and standard parts

Post by pk_090 »

Any pictures of the wheels? Why am i skint when everything i want comes for sale :(
platmatt8 wrote:Lauren has got bigger balls than most men on this site

charged wrote:Mine's probably screaming 'stop raping me' :D
cartledge_uk
Posts: 7608
Joined: Sun Nov 13, 2005 6:28 pm
Location: Newbury

Re: [FINALIZED] Selling up and breaking 4agze- tuning and standard parts

Post by cartledge_uk »

Photos will come for everything, if your interested in something then a holding deposit could secure for a noted timeframe. :thumleft:
Ben
Posts: 3074
Joined: Fri Aug 01, 2008 9:49 pm
Location: Oxford(ish)
Contact:

Re: [FINALIZED] Selling up and breaking 4agze- tuning and standard parts

Post by Ben »

Let me know if you want pre-payment for those braided lines ;)
2001 BMW M5 (Bahnstormer) | 2004 RX8 231 (the Racecat) | 2001 Volvo V70 (Swedish eBay barge)

Previous:
1989 MR2 Mk1b T-bar | 1988 MR2 SC Super Edition
kaiowas
Posts: 1953
Joined: Tue Jun 07, 2005 3:06 pm
Location: Norfolk
Contact:

Re: [FINALIZED] Selling up and breaking 4agze- tuning and standard parts

Post by kaiowas »

Got any more info on the Toda top mounts? Are they suitable for use with a coilover type setup or are they for use with stock type springs?
SuperRedMR2
Posts: 5494
Joined: Mon May 16, 2005 8:40 pm
Location: Wickford, Essex

Re: [FINALIZED] Selling up and breaking 4agze- tuning and standard parts

Post by SuperRedMR2 »

Hiya Tim,

Can I have the ARP flywheel bolts please? They'll go with my set i've just bought from the states :)
cartledge_uk
Posts: 7608
Joined: Sun Nov 13, 2005 6:28 pm
Location: Newbury

Re: [FINALIZED] Selling up and breaking 4agze- tuning and standard parts

Post by cartledge_uk »

kaiowas wrote:Got any more info on the Toda top mounts? Are they suitable for use with a coilover type setup or are they for use with stock type springs?


They are the ones fensport used to sell so fit std mk1's suspension and need one of the bolts removed to fit the front of a 1a turret (4 lugs and 3 holes)

Not sure if they work with coilovers? Do the std mounts?
cartledge_uk
Posts: 7608
Joined: Sun Nov 13, 2005 6:28 pm
Location: Newbury

Re: [FINALIZED] Selling up and breaking 4agze- tuning and standard parts

Post by cartledge_uk »

SuperRedMR2 wrote:Hiya Tim,

Can I have the ARP flywheel bolts please? They'll go with my set i've just bought from the states :)


They'll be a while unfortunately as I need to sell the engine first and need to keep it running
SuperRedMR2
Posts: 5494
Joined: Mon May 16, 2005 8:40 pm
Location: Wickford, Essex

Re: [FINALIZED] Selling up and breaking 4agze- tuning and standard parts

Post by SuperRedMR2 »

That's okay mate. I can wait a while unless I find some elsewhere.
stenky
Posts: 356
Joined: Wed Mar 23, 2011 9:04 pm
Location: Slovakia

Re: [FINALIZED] Selling up and breaking 4agze- tuning and standard parts

Post by stenky »

any chance of getting the 4AGZE alternator bracket?
Image
coanda
Posts: 512
Joined: Wed Apr 15, 2009 8:22 pm

Re: [FINALIZED] Selling up and breaking 4agze- tuning and standard parts

Post by coanda »

Would be interested in pics of wheels and superchargers for condition.
BIGBOBO
Posts: 531
Joined: Sun Dec 02, 2007 1:05 am
Location: Belgium

Re: [FINALIZED] Selling up and breaking 4agze- tuning and standard parts

Post by BIGBOBO »

Do you perhaps have a spare alternator or waterpump/supercharger belt tensioner?
SuperRedMR2
Posts: 5494
Joined: Mon May 16, 2005 8:40 pm
Location: Wickford, Essex

Re: [FINALIZED] Selling up and breaking 4agze- tuning and standard parts

Post by SuperRedMR2 »

Tim have you got the front ARB brackets? They standard still?

Cheers
Tiamat
IMOC Moderator
Posts: 10179
Joined: Mon Jan 24, 2005 2:02 pm
Location: Hailsham, East Sussex

Re: [FINALIZED] Selling up and breaking 4agze- tuning and standard parts

Post by Tiamat »

Do the wheels have tyres on them? If so, are they road legal?
I am going to live forever, or die trying!
sherwin1983
Posts: 126
Joined: Thu Apr 04, 2013 1:06 pm

Because race car! - parts wanted

Post by sherwin1983 »

ill take the Woodsport rear brace £50

ping me a PM
cartledge_uk
Posts: 7608
Joined: Sun Nov 13, 2005 6:28 pm
Location: Newbury

Re: [FINALIZED] Selling up and breaking 4agze- tuning and standard parts

Post by cartledge_uk »

Photos will come this weekend, sorry for the delay.
Shaner
Posts: 4
Joined: Fri Apr 05, 2013 12:20 am

Re: [FINALIZED] Selling up and breaking 4agze- tuning and standard parts

Post by Shaner »

You don't happen to have an HKS oversize crank pulley by any chance (or know of anyone else selling one)?

I bought one from a guy in the USA, but it after 3 months it hasn't turned up, the seller has gone quiet, and looks like I've been ripped off :(
cartledge_uk
Posts: 7608
Joined: Sun Nov 13, 2005 6:28 pm
Location: Newbury

Re: [FINALIZED] Selling up and breaking 4agze- tuning and standard parts

Post by cartledge_uk »

Shaner wrote:You don't happen to have an HKS oversize crank pulley by any chance (or know of anyone else selling one)?

I bought one from a guy in the USA, but it after 3 months it hasn't turned up, the seller has gone quiet, and looks like I've been ripped off :(


I have a techno toy tuning one that's never been used 175mm i think. You interested?
jumpman33
Posts: 38
Joined: Fri Aug 17, 2012 10:55 pm
Location: United Kingdom

Lights

Post by jumpman33 »

Hi, do you have the supercharger lights for sale? how much?
sherwin1983
Posts: 126
Joined: Thu Apr 04, 2013 1:06 pm

pictures

Post by sherwin1983 »

cartledge_uk wrote:Photos will come this weekend, sorry for the delay.


Any pics yet? :whistle:
Locked

Return to “Mk1”