[Mk2] [NA] weld on sills
Moderators: IMOC Moderators, IMOC Committee Members
-
- Posts: 396
- Joined: Sun Nov 30, 2008 10:45 am
[Mk2] [NA] weld on sills
Hi can any one tell me where to get weld on over sills for a mk 2 mr2 please thanks.
Re: [Mk2] [NA] weld on sills
looks like a no then ...i would like to find this out too
-
- Posts: 2072
- Joined: Mon Jun 27, 2005 4:44 pm
- Location: Hellingly, East Sussex
Re: [Mk2] [NA] weld on sills
Look and you shall see ... or some fink like that!!!!
http://www.imoc.co.uk/forums/kb.php?mode=article&k=121
I dont know if the prices are the same, but its a start.
if you dont know how to weld, then heres a good link i founded:
http://www.mig-welding.co.uk/
http://www.imoc.co.uk/forums/kb.php?mode=article&k=121
I dont know if the prices are the same, but its a start.
if you dont know how to weld, then heres a good link i founded:
http://www.mig-welding.co.uk/
We ALL make mistakes !!!
-
- IMOC Affiliated Trackday Organiser
- Posts: 10506
- Joined: Tue Jan 25, 2005 9:49 am
- Location: South Yorkshire
Re: [Mk2] [NA] weld on sills
Usual Mk2 sill corrosion is at the rear, and that's part of the rear 1/4 panel.
However, the door sill is the same profile.
We buy a door sill, and cut it as necessary to repair the corrosion.
Beginners can weld the panel on top, those more expert can butt weld the panel in for a flush repair.
MrT door sill about £64.
Whereabouts are you? Anywhere near us? If so, take a trip to us and i'll teach you to weld.
However, the door sill is the same profile.
We buy a door sill, and cut it as necessary to repair the corrosion.
Beginners can weld the panel on top, those more expert can butt weld the panel in for a flush repair.
MrT door sill about £64.
Whereabouts are you? Anywhere near us? If so, take a trip to us and i'll teach you to weld.
-
- Posts: 459
- Joined: Sat Aug 09, 2008 4:01 pm
- Location: Liverpool, UK
Re: [Mk2] [NA] weld on sills
excellent info