haha! that must be the dirty throttles picture!
Chris, no probs mate
vid request! another vid when you have the throttles closed a bit more and balanced up please (: and perhaps a little rev (: with a shot of your lit up dash too!
hmmm I wonder if you can get an MOT with a 3000rpm idle
Making of a Mk1.6 (slowly)
Moderators: IMOC Moderators, IMOC Committee Members
Re: Making of a Mk1.6 (slowly)
. . 6 . 7 . 8
5 . . . . i . . 9
5 . . . . i . . 9
-
- Posts: 7608
- Joined: Sun Nov 13, 2005 6:28 pm
- Location: Newbury
Re: Making of a Mk1.6 (slowly)
vashy wrote:
hmmm I wonder if you can get an MOT with a 3000rpm idle
I would like to know, becasue thats my problme too at the moment.
Re: Making of a Mk1.6 (slowly)
I'll se what I can do re the vid Vash but I won't get much more garage time until after Christmas, the ITBs are already closed down. I've got to change the coolant on the Hi-lux tomorrow seeing as it's got just water in it at the moment. I was lucky not to have a split rad from it freezing up on Friday. F'in garages doing a halfarsed job.
Re: Making of a Mk1.6 (slowly)
Thought I'd put a wee vid up of the beast, after four years stuck in the garage we decided to get her out for a wash/claybar and polish. You may wanna turn down your volume
http://www.youtube.com/watch?v=mBSaL8HJ ... ture=share
http://www.youtube.com/watch?v=mBSaL8HJ ... ture=share
Re: Making of a Mk1.6 (slowly)
I turned my speakers up good to see it roll! looks really nice all shiny. and loving that rear wing
. . 6 . 7 . 8
5 . . . . i . . 9
5 . . . . i . . 9
Re: Making of a Mk1.6 (slowly)
Dyno booked for the 27th June @ Surrey rolling road. Ed from Fusion Motorsports is doing the honours.
-
- IMOC Committee
- Posts: 11345
- Joined: Tue May 30, 2006 5:41 pm
- Location: The Toast Aisle
- Contact:
Re: Making of a Mk1.6 (slowly)
Limeymk1 wrote:Dyno booked for the 27th June @ Surrey rolling road. Ed from Fusion Motorsports is doing the honours.
Tell him to reply to my sodding email when you see him
IMOC-UK - the only club to win 'Best Club Stand' at JAE more than once, and twice in a row!
Re: Making of a Mk1.6 (slowly)
toxo wrote:Limeymk1 wrote:Dyno booked for the 27th June @ Surrey rolling road. Ed from Fusion Motorsports is doing the honours.
Tell him to reply to my sodding email when you see him
Sorry, forgot to give Ed a boot dude.
Well she put down 182.3 bhp (6800rpm) with about 170 Ibft torque (about 4000 rpm) but that's without VVTi and the ITBs still need some balancing. Both Ed (Fusion Motorsport) & Charlie (Surrey Rolling Road) rechon she has much more to give.
Vid on youtube:
http://www.youtube.com/watch?v=nD6dz7yBj5M
http://www.youtube.com/watch?v=sg528g3SmGc
Piccies:
Re: Making of a Mk1.6 (slowly)
very tasty!! any vids of this running bet its a machine?
Re: Making of a Mk1.6 (slowly)
After failing MoT on welding I've done one side:
Chopped:
Fettled to fit:
Tacked & blown in one place:
Ground back and POR15'd:
Got these to go on at some point in life, has to be the most expensive way to level the headlights
Chopped:
Fettled to fit:
Tacked & blown in one place:
Ground back and POR15'd:
Got these to go on at some point in life, has to be the most expensive way to level the headlights
Last edited by LimeyMk1 on Mon Mar 05, 2012 10:07 pm, edited 1 time in total.
-
- Posts: 6149
- Joined: Tue Jan 25, 2005 10:37 am
- Location: Market Drayton Shropshire
- Contact:
Re: Making of a Mk1.6 (slowly)
Good stuff Chris!
Re: Making of a Mk1.6 (slowly)
Icsunonove wrote:Good stuff Chris!
Still got the other side to do Tom (same again). Hopefully won't take me as long, just need to get the car turned round so I can access that side in the garage.
The only bit of metal that had failed was an old patch that must have been put on the car before I got her.
Re: Making of a Mk1.6 (slowly)
cool cool
What´s left on the MOT list then chris? At the weekend I picked up a magazine with an article about the new MOT regs. It said that there was an amnesty until the first of April, until then you only get an advisory that it will fail next time
What´s left on the MOT list then chris? At the weekend I picked up a magazine with an article about the new MOT regs. It said that there was an amnesty until the first of April, until then you only get an advisory that it will fail next time
. . 6 . 7 . 8
5 . . . . i . . 9
5 . . . . i . . 9
Re: Making of a Mk1.6 (slowly)
Just need to weld up the other side then noise (or friendly MoT) and emissions.
I'm hoping to chat to the guy who does the MoT and see if I can sit with the laptop and adjust the fuelling/timing to bring the emissions into line for the idle and 3000 rpm slots on the test so she passes then get Ed to adjust the full map to improve the fuelling.
I guess it didn't help that the initial mapping was done on one of the hottest days of the year last year.
I'm hoping to chat to the guy who does the MoT and see if I can sit with the laptop and adjust the fuelling/timing to bring the emissions into line for the idle and 3000 rpm slots on the test so she passes then get Ed to adjust the full map to improve the fuelling.
I guess it didn't help that the initial mapping was done on one of the hottest days of the year last year.
Re: Making of a Mk1.6 (slowly)
Got the evil wench out of the garage today and had another go at the ITBs, got them a little better than in the piccy.
Wish I'd had the camera on video as she emitted the loudest backfire I've heard yet when I turned the ignition on to start balancing, set the neighbourhood dogs off rattled the garage and earned a WTF! from a nearby garden.
Had a dig at the welding I need to do, done this side already:
(nice stance with the BC coilovers fitted, thanks for the assist Vashy)
Chewing gum anyone:
Bit rusty:
Initial chop:
Got bored and put her away, got stuff to do.
Wish I'd had the camera on video as she emitted the loudest backfire I've heard yet when I turned the ignition on to start balancing, set the neighbourhood dogs off rattled the garage and earned a WTF! from a nearby garden.
Had a dig at the welding I need to do, done this side already:
(nice stance with the BC coilovers fitted, thanks for the assist Vashy)
Chewing gum anyone:
Bit rusty:
Initial chop:
Got bored and put her away, got stuff to do.
Re: Making of a Mk1.6 (slowly)
I love the names you come up with for her (and after working on her, I know why you do!)Limeymk1 wrote:Got the evil wench out of the garage today
Limeymk1 wrote:Wish I'd had the camera on video as she emitted the loudest backfire I've heard yet when I turned the ignition on to start balancing, set the neighbourhood dogs off rattled the garage and earned a WTF! from a nearby garden.
remember the scene in Gone in Sixty Seconds when Memphis is anxious, scared even, about driving Eleanor? I think that´s what driving El will be like
. . 6 . 7 . 8
5 . . . . i . . 9
5 . . . . i . . 9
Re: Making of a Mk1.6 (slowly)
That is the biggest exhaust I have ever seen on a MK1.
Re: Making of a Mk1.6 (slowly)
vashy wrote:I love the names you come up with for her (and after working on her, I know why you do!)Limeymk1 wrote:Got the evil wench out of the garage today
Limeymk1 wrote:Wish I'd had the camera on video as she emitted the loudest backfire I've heard yet when I turned the ignition on to start balancing, set the neighbourhood dogs off rattled the garage and earned a WTF! from a nearby garden.
remember the scene in Gone in Sixty Seconds when Memphis is anxious, scared even, about driving Eleanor? I think that´s what driving El will be like
She's a wee biatch.
I gave her a bit of a boot down the alleyway when putting her away and she had a nice wiggle.
I admit I was showing off, there were some folks coming out of the park.
I bought the exhaust cos it was supposed to be the quietest aftermarket tubby box around. Didn't work out that way when stuck on my bloody car.
Re: Making of a Mk1.6 (slowly)
Just waved her off on a car transporter, hopefully back in 2 weeks with the passenger side welded up and some fresh paint on her.
-
- Posts: 4789
- Joined: Thu Nov 24, 2011 1:01 pm
Re: Making of a Mk1.6 (slowly)
I saw the videos of the start-up etc on YouTube some time back. My first thoughts were "F me that's loud!" followed by "I hope the neighbours are understanding, or deaf!"
Not exactly a stealth machine is she
Not exactly a stealth machine is she