[Mk2] [Generic] Fitting Nissan S14 200SX alloys?

Peter C · Post by **Peter C** » Tue Feb 07, 2012 12:28 pm

The wheels are 5x114 PCD, 16" and look similar to stock Rev 2/3/4 SW20 wheels.

Has anyone seen these fitted to an MR2?

Peter Gidden · Post by **Peter Gidden** » Tue Feb 07, 2012 12:29 pm

Offsets?

Peter C · Post by **Peter C** » Tue Feb 07, 2012 12:34 pm

Peter Gidden - SBITS wrote:Offsets?

PCD - 5x114
Offset - 35 to 42
Bore - 66.1

Peter C · Post by **Peter C** » Tue Feb 07, 2012 12:50 pm

That's fairly close to MR2 dims, isn't it?

I assume I would need 20mm spacers on the rear?

craig · Post by **craig** » Tue Feb 07, 2012 1:07 pm

You wouldn't need spacers. Stock MK2 Offset is +45.

Bore size of wheels is oversize though, so you'd need spigot rings to reduce to 60.1.

craig · Post by **craig** » Tue Feb 07, 2012 1:08 pm

What's the width also?

Quigonjay · Post by **Quigonjay** » Tue Feb 07, 2012 3:30 pm

6.5" all round
considered fitting them once upon a time but not wide enough for the rear

Peter C · Post by **Peter C** » Tue Feb 07, 2012 5:11 pm

Wouldn't a 225 section tyre fit on a 6.5" rim?

Quigonjay · Post by **Quigonjay** » Tue Feb 07, 2012 5:22 pm

it would be a stretch, most tyre manufacturers recommend 7" - 8.5" for a 225/45/16 with 7.5" being optimum

uglee · Post by **uglee** » Tue Feb 07, 2012 5:30 pm

Got a picture of a mk2 on S14 alloys somewhere, shall try dig it out.

sparkyturbo · Post by **sparkyturbo** » Thu Feb 09, 2012 8:42 pm

mates got them on his na
ill take some pics the weekend for you

www.imoc.co.uk