Will alloys in this size fit a MK1?
38 4x100/4x108
they are OZ F1's also what size of tyre would you reccomend for them if they fit?
Thanks
Donna
Will these alloys fit?
Moderators: IMOC Moderators, IMOC Committee Members
Re: Will these alloys fit?
if the 38 refers to the ET then thats OK
4X100 is the correct PCD
what is the 4X108?
and importantly you have omitted the rim diameter i.e. 14" 14" 16" or 17"
4X100 is the correct PCD
what is the 4X108?
and importantly you have omitted the rim diameter i.e. 14" 14" 16" or 17"
Re: Will these alloys fit?
Hi Kevin,
Thanks for the reply they are multi fit so i think 108 is the other size they can fit,
They are 15" wheels,
Im clueless with alloys and dont understand the charts people show me to explain it
Thanks
Donna
Thanks for the reply they are multi fit so i think 108 is the other size they can fit,
They are 15" wheels,
Im clueless with alloys and dont understand the charts people show me to explain it
Thanks
Donna
Re: Will these alloys fit?
with 15" rims if you go with 195/50/15 tyres they will be as close as you can get to the same rolling radius as Std. tyres, actually they will be 0.28% smaller or the difference between a brand new tyre and a part worn one, speedo reading will at 70MPH be 0.2MPH slower
so pretty much as close as you can get
edit
forgot to mention the center bore is 54.1mm, so the wheels need to be this or bigger then you will need the correct size spigot rings
so pretty much as close as you can get
edit
forgot to mention the center bore is 54.1mm, so the wheels need to be this or bigger then you will need the correct size spigot rings
Re: Will these alloys fit?
Donna, just in case you're not familiar with spigot rings. They are sleeves that fit in the centre of the wheel to make wheel snug on the axle. Without these the wheel, just sits on the wheels nuts and that's not completely stable. Decent alloy wheel companies carry lots of different sizes of spigots so that wheels can fit different cars, with different centre sizes. I had to 'phone a few however, before finding one that carried a decent range.
So you can drive down there on the wheel nuts alone and they can remove one wheel and match a spigot design. I paid a tenner for 4.
So you can drive down there on the wheel nuts alone and they can remove one wheel and match a spigot design. I paid a tenner for 4.
Re: Will these alloys fit?
Thats great
Thanks for the replies guys
Thanks for the replies guys