Keyless entry with Window close module Driver Window Wiring help

[shoa]

I think the credit goes to ulysess1966 his last line made me think of the sensitivity.

I'd reckon you'd be risking blowing the fuse if the closure module is driving the passenger door for more that a few seconds after it is closed.

The battery is great, nice new one so hasn't gone flat.

These chinese things with only half destructions and garbled english can be a pain to follow.

Still this will be a nice thread for others to folllow if they want the upgrade of keyless entry and window closure.

Might do the boot auto to as the key is sometimes hard to open it.

[jimi]

Mine is a 4 window + mirrors module, only using 2 outputs so I have plenty left if I wanted to add anything

[ulysess1966]

Might do the boot auto to as the key is sometimes hard to open it.

That sounds interesting, what's needed for that?

Someone gave me a bunch of tasty little 12volt solenoids and I've been scratching my head thinking what I could use them for. They should be able to activate a car lock okay.

I had the same problem with the Chinglish destructions. Something about a 'gasbone light' on the sheet I had which meant nothing. If you Google 'gasbone light' it comes up on a car forums all over the place and nobody ever seems to have decoded it!

[shoa]

Yeah should be enough to open a boot lock one of them solenoid.

fleabay boot popper or boot/trunk release can be used with remote for keyless entry module.

They say you need a 5 pin relay 12v 30A/40A as well, but with out the destructions hard to say what its for but I am sure some one will know.

I have the 4 door opener as well I guess they say 2 door and then shove a little more money on the four door opener even though its the same product

Its annoying having to go to the front of the car and bend over to pull the lever after fiddling with the keys at the back of the car for a little while.

So much to do, so little time to do it all in.