Thank you very much lads
Was due to be fitting my tow hooks on this week but the weather isnt helping matters, i will get them on one day
I have sent some bits off the car to have some work done i wont say to much now but will update the thread as soon as they come back
With the running in near on complete i am in the possition to spec and order up my fueling kit consisting, of 2 x bosch pumps, fuel rail, injectors (1200cc at the moment), aeromotive fuel pressure regulator and loads of earls fitting and -8 braided fuel lines.
with alot of other little things that will be orderd after xmas, evans coolant trd rad cap, ally front rad, aem water meth kit, aem water meth gauge and controller, (new to the market link below)
http://www.youtube.com/watch?v=xIMoH4Y4I6Q
The fueling kit will be orderd this week sometime, once there here irl start on taking the old fuel rail injectors etc out along with the fuel tank itself and do the necessary, will also be fitting my 90mm ripps throttle body along with a port matched rev3 inlet manifold to suit.
(so if anyone is interested in my mirror polished inlet manifold and polished thorttle body they will be up for sale soon )
With that all completed i will order my syvec S6 ecu with all the features listed on the previous page, also looking into there new syvec display unit coming out soon
Then finally a mapp by ryan to see what she can do
At some point i want to have arches rolled and pulled, and adjust the tein coilovers so it sits lower as i want the tire to sit inside the ach, will then look towards aftermarket drop link,s white line anti roll bars, tein pillow ball tension rods and polybushes in every possible place. but that will come much much later on.
The Tic Tac 500bhp build thread
Moderators: IMOC Moderators, IMOC Committee Members
Re: The Tic Tac 500bhp build thread
stock isnt that soup or something.....?
tic tac 500bhp build thread
http://www.imoc.co.uk/forums/viewtopic. ... 57#1182357
tic tac 500bhp build thread
http://www.imoc.co.uk/forums/viewtopic. ... 57#1182357
Re: The Tic Tac 500bhp build thread
Well with 2011 upon us and as i have manged to keep a job and the car i have alot planned for this year, heres a list of what i have orderd and what will be done over the next couple of months
~ Mineral oil out fresh Motul Chrono in
~ New Toyota distributor cap and rotary arm
~ TRD high pressure (1.5bar) Rad cap CHECK
~ Hubcentric 20mm Rear spacers, then roll/flair arches then lower to the deck
~ Avensis front and rear, Drop links (as there shorter than standrard)
~ Evans coolant NPG-R
~ Hell Braided clutch line
~ Hell Braided break lines
~ Nimbus Thermo-Tec Turbo Cover Turbo blanket
~ Engine damper
~ Fit D1 spec tow hooks, with custom made brackets CHECK
~ Wolfcatz fuelling kit, 1000cc injectors, high pressure fuel rail CHECK
~ 2 x walbro 275 ltr pumps CHECK
~ Aeromotive fuel pressure regulator CHECK
~ Aeromotive inline fuel filter CHECK
~ -10 braided fuel line and earls fittings CHECK
~ Syvec S6GP ECU, with 8 position map/ traction control cal switch, 4bar map sensor....
~ Aem water methanol injection kit
~Aem W/M gauge/ controller
~ Fully rebuilt gearbox with new syncros CHECK
~ Mocul thermostatic oil cooler
~ Greddy Trust, skyline intercooler 100mm thick
~ Whiteline anti roll bars Front and rear with poly bushes CHECK
~ Tein rear pillow ball tension rods
~ F1 style carbon wing mirrors
~ Carbon mods front splitter
~ Carbon mods carnards
~ Orange padding for roll cage (more needed)
~ Custom made rear carbon fibre wing (attaches to the existing spoiler side mounts)
~ Additional Cusco drivers door bar
~ K&N induction filter (LARGE)
~ Lots and lots of grade 8 spark plugs CHECK
~ Fully Heat wrap exhaust through to back box
~ Foot-well cradle for passenger
~ Flock door cards
~ Flock rear plastic shelf (by rear window) flock plastic rear side panels
~ Poly bushes allround
~ Tein/toms front under brace
~ Big break kit Greddy/illest/willwood
~ Remove standard oil catch can plumb drain hose into hks can CHECK
~ Simpson/omp white helmet
~ Go Pro hd camera
~ Clear headlights
~ Engine bay/boot lid chrome dampers
~ Fresh new Rays gram light wheel stickers
One more thing lots of track days drag action, i will post up what im booked up for if anyone wnats to come along to say hi
Im sure i will add to the list but that will do for now.
Lots of pics to come in the next few weeks
~ Mineral oil out fresh Motul Chrono in
~ New Toyota distributor cap and rotary arm
~ TRD high pressure (1.5bar) Rad cap CHECK
~ Hubcentric 20mm Rear spacers, then roll/flair arches then lower to the deck
~ Avensis front and rear, Drop links (as there shorter than standrard)
~ Evans coolant NPG-R
~ Hell Braided clutch line
~ Hell Braided break lines
~ Nimbus Thermo-Tec Turbo Cover Turbo blanket
~ Engine damper
~ Fit D1 spec tow hooks, with custom made brackets CHECK
~ Wolfcatz fuelling kit, 1000cc injectors, high pressure fuel rail CHECK
~ 2 x walbro 275 ltr pumps CHECK
~ Aeromotive fuel pressure regulator CHECK
~ Aeromotive inline fuel filter CHECK
~ -10 braided fuel line and earls fittings CHECK
~ Syvec S6GP ECU, with 8 position map/ traction control cal switch, 4bar map sensor....
~ Aem water methanol injection kit
~Aem W/M gauge/ controller
~ Fully rebuilt gearbox with new syncros CHECK
~ Mocul thermostatic oil cooler
~ Greddy Trust, skyline intercooler 100mm thick
~ Whiteline anti roll bars Front and rear with poly bushes CHECK
~ Tein rear pillow ball tension rods
~ F1 style carbon wing mirrors
~ Carbon mods front splitter
~ Carbon mods carnards
~ Orange padding for roll cage (more needed)
~ Custom made rear carbon fibre wing (attaches to the existing spoiler side mounts)
~ Additional Cusco drivers door bar
~ K&N induction filter (LARGE)
~ Lots and lots of grade 8 spark plugs CHECK
~ Fully Heat wrap exhaust through to back box
~ Foot-well cradle for passenger
~ Flock door cards
~ Flock rear plastic shelf (by rear window) flock plastic rear side panels
~ Poly bushes allround
~ Tein/toms front under brace
~ Big break kit Greddy/illest/willwood
~ Remove standard oil catch can plumb drain hose into hks can CHECK
~ Simpson/omp white helmet
~ Go Pro hd camera
~ Clear headlights
~ Engine bay/boot lid chrome dampers
~ Fresh new Rays gram light wheel stickers
One more thing lots of track days drag action, i will post up what im booked up for if anyone wnats to come along to say hi
Im sure i will add to the list but that will do for now.
Lots of pics to come in the next few weeks
Last edited by GTS GAV on Thu Jan 13, 2011 3:07 pm, edited 1 time in total.
stock isnt that soup or something.....?
tic tac 500bhp build thread
http://www.imoc.co.uk/forums/viewtopic. ... 57#1182357
tic tac 500bhp build thread
http://www.imoc.co.uk/forums/viewtopic. ... 57#1182357
Re: The Tic Tac 500bhp build thread
many many times i have been told that, I sapose you have to have a hobbie, i call it more of an addiction
stock isnt that soup or something.....?
tic tac 500bhp build thread
http://www.imoc.co.uk/forums/viewtopic. ... 57#1182357
tic tac 500bhp build thread
http://www.imoc.co.uk/forums/viewtopic. ... 57#1182357
Re: The Tic Tac 500bhp build thread
Crazy??????
Yup!!!!!
I sadly have the same bug......
Yup!!!!!
I sadly have the same bug......
Re: The Tic Tac 500bhp build thread
Shmed wrote:Crazy??????
Yup!!!!!
I sadly have the same bug......
I'll third that
Re: The Tic Tac 500bhp build thread
It must be something in the beer
stock isnt that soup or something.....?
tic tac 500bhp build thread
http://www.imoc.co.uk/forums/viewtopic. ... 57#1182357
tic tac 500bhp build thread
http://www.imoc.co.uk/forums/viewtopic. ... 57#1182357
-
- Posts: 2219
- Joined: Thu Feb 23, 2006 10:48 pm
- Location: Newcastle
Re: The Tic Tac 500bhp build thread
Few things on this build I don't get I may have missed something
Your car is a rev3 yeah!! 1st post clearly says rev 3 and the early pictures are of a rev 3 but the engine your stripping the one you removed and posted pics up of you stripping is a rev 2 ?? whats the craic there then?
Your car is a rev3 yeah!! 1st post clearly says rev 3 and the early pictures are of a rev 3 but the engine your stripping the one you removed and posted pics up of you stripping is a rev 2 ?? whats the craic there then?
Re: The Tic Tac 500bhp build thread
Gav's been banned mate, you'd have to take it up with him on the banned site....
January 2014
May 2015
Still in the garage...
..the only thing I can promise for sure is slow progress.
May 2015
just have this niggling thought that if I rip out the wiring, then the car will never get out of the garage again.
Still in the garage...
-
- Posts: 2219
- Joined: Thu Feb 23, 2006 10:48 pm
- Location: Newcastle
Re: The Tic Tac 500bhp build thread
gavs build thread pictures
nathans dark destroyer pictures
[/img]
Nathans engine had eagle rods but gavs engine has Carrillo see pictures
Gav something really wrong with this build please explain Unless you bought nathans small block but still your spec list is completely wrong?
[email protected]
nathans dark destroyer pictures
[/img]
Nathans engine had eagle rods but gavs engine has Carrillo see pictures
Gav something really wrong with this build please explain Unless you bought nathans small block but still your spec list is completely wrong?
[email protected]
Last edited by Leakie Tbar on Sat Mar 12, 2011 5:09 pm, edited 1 time in total.
-
- Posts: 2219
- Joined: Thu Feb 23, 2006 10:48 pm
- Location: Newcastle
Re: The Tic Tac 500bhp build thread
Shmed wrote:Gav's been banned mate, you'd have to take it up with him on the banned site....
-
- Posts: 3103
- Joined: Wed Oct 12, 2005 6:03 pm
- Location: Fenny Compton (Warwickshire)
- Contact:
Re: The Tic Tac 500bhp build thread
GTS GAV wrote:gas flowed, ported oversized valves fitted with 5 angle valve seats, uprated double endid hks valve springs also fitted
And this one......
It's funny because in the thread where he pictures my block there are pictures of another block...... mine has a black timing belt, the other has a purple one....
Builders of the the UK's first 9second MR2 - 9.722 @ 148 MPH ----- 07947883103 ---- www.centurymotorsport.com
-
- Posts: 2219
- Joined: Thu Feb 23, 2006 10:48 pm
- Location: Newcastle
Re: The Tic Tac 500bhp build thread
I'm going to call bullsheet on this thread
-
- Posts: 3103
- Joined: Wed Oct 12, 2005 6:03 pm
- Location: Fenny Compton (Warwickshire)
- Contact:
Re: The Tic Tac 500bhp build thread
Leakie Tbar wrote:I'm going to call bullsheet on this thread
Image Replaced With URL For Quote http://i831.photobucket.com/albums/zz23 ... ll$h1t.gif
Seems a bit OTT to go too such lengths but lies as blatant as that doesn't fill you with confidence!!!
Builders of the the UK's first 9second MR2 - 9.722 @ 148 MPH ----- 07947883103 ---- www.centurymotorsport.com
-
- Posts: 3103
- Joined: Wed Oct 12, 2005 6:03 pm
- Location: Fenny Compton (Warwickshire)
- Contact:
Re: The Tic Tac 500bhp build thread
GTS GAV wrote:
Another one...
Builders of the the UK's first 9second MR2 - 9.722 @ 148 MPH ----- 07947883103 ---- www.centurymotorsport.com
Re: The Tic Tac 500bhp build thread
Last edited by T.F.S. on Mon Jun 27, 2011 8:31 am, edited 1 time in total.
-
- Posts: 2219
- Joined: Thu Feb 23, 2006 10:48 pm
- Location: Newcastle
Re: The Tic Tac 500bhp build thread
I have no doubt the car is modified but something's wrong I just cant figure out why he has done it ?
I cant believe no one picked up earlier on it, its not my cup of tea a bit tic-tacky but hey each to there own
I cant believe no one picked up earlier on it, its not my cup of tea a bit tic-tacky but hey each to there own
-
- Posts: 3103
- Joined: Wed Oct 12, 2005 6:03 pm
- Location: Fenny Compton (Warwickshire)
- Contact:
Re: The Tic Tac 500bhp build thread
I had Gav on the phone earlier explaining his side of the story ... apparently the images were pulled from google searches and were for illustration only as he never had any pictures of his motor at that stage.
Seems a decent enough guy ... thought i'd pop something up as he can't himself!
Seems a decent enough guy ... thought i'd pop something up as he can't himself!
Builders of the the UK's first 9second MR2 - 9.722 @ 148 MPH ----- 07947883103 ---- www.centurymotorsport.com
Re: The Tic Tac 500bhp build thread
Shouldn't the url's of the pictures would tell where they came from?
If they were for illustrating purposes only, surely he wouldn't have gone through the effort of re-uploading them.
If they were for illustrating purposes only, surely he wouldn't have gone through the effort of re-uploading them.
-
- Posts: 2219
- Joined: Thu Feb 23, 2006 10:48 pm
- Location: Newcastle
Re: The Tic Tac 500bhp build thread
They where uploaded from a completely different site now deleted by Gav